Compositionally Graded Additive Manufacturing: A Method for Alloy Development and Tribocorrosion Evaluation

Abstract Additive manufacturing (AM) enables the fabrication of materials with tailored compositional and microstructural gradients, offering unique opportunities for studying complex degradation phenomena such as tribocorrosion. In this work, a thin-walled stainless steel build with a continuous compositional gradient from super-austenitic AL6XN to austenitic 316L was produced using a dual-hopper powder feed system. Energy-dispersive spectroscopy (EDS) confirmed the compositional gradient and corresponding decrease in pitting resistance equivalent number (PREN), while electron backscatter diffraction (EBSD) revealed a microstructural gradient characteristic of thin-walled AM builds, evolving from fine elongated grains near the baseplate to coarser columnar grains at the top. Potentiostatic tribocorrosion testing in 0.6 M NaCl under anodic applied potentials demonstrated that wear rate increased with build height, inversely following the PREN gradient. Microhardness measurements confirmed the additional contribution of microstructural evolution on the local wear resistance which also impacts tribocorrosion performance. Current transients showed higher dissolution activity in 316L-rich regions and lower currents in AL6XN-rich regions, consistent with SEM observations of increased corrosion products in the 316L-regions. These results highlight that tribocorrosion performance is driven by the combined effects of wear resistance and corrosion resistance. More importantly, they demonstrate the utility of AM-graded samples as an efficient platform for screening alloys enabling novel alloy development and as a means for probing the coupled effects of wear and corrosion in tribocorrosion studies.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-12
DOI
https://doi.org/10.21203/rs.3.rs-11512502/v1
Primary Topic
Additive Manufacturing Materials and Processes
Type
preprint

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Compositionally Graded Additive Manufacturing: A Method for Alloy Development and Tribocorrosion Evaluation

Andrew J. Birnbaum, Mary E. Parker, Anna K. Rawlings, Scott M. Wells
Research Square
Additive Manufacturing Materials and Processes
preprint

Compositionally Graded Additive Manufacturing: A Method for Alloy Development and Tribocorrosion Evaluation

Andrew J. Birnbaum, Mary E. Parker, Anna K. Rawlings, Scott M. Wells
preprint en

Abstract

Abstract Additive manufacturing (AM) enables the fabrication of materials with tailored compositional and microstructural gradients, offering unique opportunities for studying complex degradation phenomena such as tribocorrosion. In this work, a thin-walled stainless steel build with a continuous compositional gradient from super-austenitic AL6XN to austenitic 316L was produced using a dual-hopper powder feed system. Energy-dispersive spectroscopy (EDS) confirmed the compositional gradient and corresponding decrease in pitting resistance equivalent number (PREN), while electron backscatter diffraction (EBSD) revealed a microstructural gradient characteristic of thin-walled AM builds, evolving from fine elongated grains near the baseplate to coarser columnar grains at the top. Potentiostatic tribocorrosion testing in 0.6 M NaCl under anodic applied potentials demonstrated that wear rate increased with build height, inversely following the PREN gradient. Microhardness measurements confirmed the additional contribution of microstructural evolution on the local wear resistance which also impacts tribocorrosion performance. Current transients showed higher dissolution activity in 316L-rich regions and lower currents in AL6XN-rich regions, consistent with SEM observations of increased corrosion products in the 316L-regions. These results highlight that tribocorrosion performance is driven by the combined effects of wear resistance and corrosion resistance. More importantly, they demonstrate the utility of AM-graded samples as an efficient platform for screening alloys enabling novel alloy development and as a means for probing the coupled effects of wear and corrosion in tribocorrosion studies.

Research Square
United States Naval Research Laboratory (US), Excet (United States) (US)
Office of Naval Research
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon