SA-based monitoring of concrete seismic shear stress within the elastic regime: influence of normal stress on sensitivity

Abstract Seismic shear force monitoring is critical for assessing the structural response of concrete buildings. PZT-based smart aggregates (SA) enable internal shear stress measurement within concrete. However, existing calibration studies typically treat normal stress as a negligible factor. Consequently, under practical compression-shear states, a fundamental knowledge gap remains regarding how normal-stress-driven interfacial stiffness nonlinearity and friction limits affect SA sensitivity. To bridge this gap, this study combines experimental and numerical approaches to investigate the nonlinear interfacial sensing mechanism of SA. Cyclic push-pull loading tests were conducted on a reinforced concrete short column embedded with 16 SAs under varying axial compression ratios (0 - 0.5). Subsequently, numerical simulations and parameter inversions were performed to elucidate the stress transfer mechanism. Experimental results show that SA sensitivity increases with the axial compression ratio but plateaus beyond 0.3, achieving a maximum growth rate of 29.1% relative to the baseline value (9.84×10³ pC/MPa). Numerical analysis suggests the underlying mechanism: initial normal stress induces compaction of the equivalent interfacial layer, enhancing shear transfer efficiency. However, at higher pressures, stiffness saturation and friction limits restrict further growth. Parameter inversion identified the optimal interfacial combination: a bilinear elastic modulus (increasing to 1.9% of the mortar modulus at a 0.1 axial compression ratio) and a 0.20 MPa friction limit, yielding a minimum root-mean-square error of 0.037×10⁴ pC/MPa. This study elucidates the nonlinear contact behavior of SAs under combined compression-shear states, establishing a quantitative baseline for practical structural monitoring strictly within the elastic, uncracked regime.

Authors

Institutions

Publication Details

Journal
Smart Materials and Structures
Published
2026-11-12
DOI
https://doi.org/10.1088/1361-665x/aec1a6
Primary Topic
Structural Health Monitoring Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

SA-based monitoring of concrete seismic shear stress within the elastic regime: influence of normal stress on sensitivity

Shuang Hou, Keyu Tu, Wenwei Tan, Haibin Zhang
Smart Materials and Structures
Structural Health Monitoring Techniques
article

SA-based monitoring of concrete seismic shear stress within the elastic regime: influence of normal stress on sensitivity

Shuang Hou, Keyu Tu, Wenwei Tan, Haibin Zhang
article en

Abstract

Abstract Seismic shear force monitoring is critical for assessing the structural response of concrete buildings. PZT-based smart aggregates (SA) enable internal shear stress measurement within concrete. However, existing calibration studies typically treat normal stress as a negligible factor. Consequently, under practical compression-shear states, a fundamental knowledge gap remains regarding how normal-stress-driven interfacial stiffness nonlinearity and friction limits affect SA sensitivity. To bridge this gap, this study combines experimental and numerical approaches to investigate the nonlinear interfacial sensing mechanism of SA. Cyclic push-pull loading tests were conducted on a reinforced concrete short column embedded with 16 SAs under varying axial compression ratios (0 - 0.5). Subsequently, numerical simulations and parameter inversions were performed to elucidate the stress transfer mechanism. Experimental results show that SA sensitivity increases with the axial compression ratio but plateaus beyond 0.3, achieving a maximum growth rate of 29.1% relative to the baseline value (9.84×10³ pC/MPa). Numerical analysis suggests the underlying mechanism: initial normal stress induces compaction of the equivalent interfacial layer, enhancing shear transfer efficiency. However, at higher pressures, stiffness saturation and friction limits restrict further growth. Parameter inversion identified the optimal interfacial combination: a bilinear elastic modulus (increasing to 1.9% of the mortar modulus at a 0.1 axial compression ratio) and a 0.20 MPa friction limit, yielding a minimum root-mean-square error of 0.037×10⁴ pC/MPa. This study elucidates the nonlinear contact behavior of SAs under combined compression-shear states, establishing a quantitative baseline for practical structural monitoring strictly within the elastic, uncracked regime.

Smart Materials and Structures
Hainan University (CN), South China University of Technology (CN)
National Natural Science Foundation of China, Natural Science Foundation of Guangdong Province, Guangdong Provincial Key Laboratory of Modern Civil Engineering Technology, South China University of Technology
Structural Health Monitoring Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon