PROBABILISTIC RELIABILITY ASSESSMENT OF CORROSION-DAMAGED REINFORCED CONCRETE BEAMS AFTER REPAIR AND CFRP STRENGTHENING
This study proposes a reliability framework for corrosion-damaged reinforced concrete (RC) beams strengthened with externally bonded CFRP. Flexural resistance, steel anchorage and CFRP debonding are treated as separate limit states, accounting for uncertainties in corrosion loss, material properties, bond recovery, CFRP effectiveness and loading. A strain-compatible sectional model is combined with interface limit states requiring experimental calibration. A reproducible Monte Carlo screening example considers a 100 × 200 mm beam with a 1900 mm span. Its loads, bond laws and effective CFRP stresses are illustrative, not validated safety predictions. The results indicate that corrosion reduces flexural reserve, while CFRP can increase it. Overall system reliability remains uncertain until anchorage and debonding models are calibrated. A validation protocol is outlined to support reliability-based strengthening design.
Authors
- V. S. Popovych (ORCID: https://orcid.org/0009-0002-0850-1590)
- Zinoviy Blikharskyy (ORCID: https://orcid.org/0000-0002-4823-6405)
Institutions
- Lviv Polytechnic National University (UA)
Publication Details
- Journal
- Theory and Building Practice
- Published
- 2026-11-12
- DOI
- https://doi.org/10.23939/jtbp2026.02.159
- Primary Topic
- Structural Behavior of Reinforced Concrete
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Research Foundation of Ukraine