A rigidly-convected, lifting-line vortex model in the optimal control of airborne wind energy systems

Abstract. Solving optimal control problems (OCPs) to estimate the performance of airborne wind energy (AWE) systems can raise the question: "How should one include a vortex-filament model into an OCP on an irregular flight path, specifically where there are also a substantial number of inequality constraints?" Since a rigidly-convected, lifting-line vortex (RLL) model might balance computational expense against sensitivity to geometric assumptions, we construct a solvable problem by judiciously lifting certain algebraic variables into an AWE OCP’s decision variables. This RLL model makes predictions that are consistent considering modeling assumptions with independently-published Large Eddy Simulations, during rotationally-steady as well as dynamic situations. Further, demonstrating the importance of including wake-modeling in airborne wind energy applications, solving an AWE OCP including this RLL model finds a substantial difference in power compared to solving an AWE OCP assuming negligible induced velocity; this paper’s demonstration problem, with a two-kite (Ampyx-AP2) system and a single- winding trajectory, predicts a 20 %–30 % loss in harvestable power (depending on initialization and objective). Unfortunately, solving such an RLL AWE OCP is also quite expensive: in the problem instances and solver configurations tested within this work, the required computational memory scales with the total number of vortex elements instantiated in the entire problem, while the processor time scales with more than that number squared. In conclusion, it is possible to include a RLL model into a solvable AWE OCP with an irregular trajectory and many inequality constraints, though the solution is quite expensive and is heavily influenced by the homotopy strategy used for initialization.

Authors

Institutions

Publication Details

Journal
Wind Energy Science Discussions
Published
2026-11-12
DOI
https://doi.org/10.5194/wes-2026-211
Primary Topic
Aerospace Engineering and Energy Systems
Type
preprint

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

A rigidly-convected, lifting-line vortex model in the optimal control of airborne wind energy systems

Curran A. Crawford, Gros Sebastien, Rachel Leuthold, Moritz Diehl et al.
Wind Energy Science Discussions
Aerospace Engineering and Energy Systems
preprint

A rigidly-convected, lifting-line vortex model in the optimal control of airborne wind energy systems

Curran A. Crawford, Gros Sebastien, Rachel Leuthold, Moritz Diehl, Jochem De Schutter
preprint en

Abstract

Abstract. Solving optimal control problems (OCPs) to estimate the performance of airborne wind energy (AWE) systems can raise the question: "How should one include a vortex-filament model into an OCP on an irregular flight path, specifically where there are also a substantial number of inequality constraints?" Since a rigidly-convected, lifting-line vortex (RLL) model might balance computational expense against sensitivity to geometric assumptions, we construct a solvable problem by judiciously lifting certain algebraic variables into an AWE OCP’s decision variables. This RLL model makes predictions that are consistent considering modeling assumptions with independently-published Large Eddy Simulations, during rotationally-steady as well as dynamic situations. Further, demonstrating the importance of including wake-modeling in airborne wind energy applications, solving an AWE OCP including this RLL model finds a substantial difference in power compared to solving an AWE OCP assuming negligible induced velocity; this paper’s demonstration problem, with a two-kite (Ampyx-AP2) system and a single- winding trajectory, predicts a 20 %–30 % loss in harvestable power (depending on initialization and objective). Unfortunately, solving such an RLL AWE OCP is also quite expensive: in the problem instances and solver configurations tested within this work, the required computational memory scales with the total number of vortex elements instantiated in the entire problem, while the processor time scales with more than that number squared. In conclusion, it is possible to include a RLL model into a solvable AWE OCP with an irregular trajectory and many inequality constraints, though the solution is quite expensive and is heavily influenced by the homotopy strategy used for initialization.

Wind Energy Science Discussions
University of Freiburg (DE), Norwegian University of Science and Technology (NO), University of Victoria (CA)
Bundesministerium für Wirtschaft und Klimaschutz, Deutsche Forschungsgemeinschaft, Danmarks Tekniske Universitet, Horizon 2020 Framework Programme
Affordable and clean energy
Aerospace Engineering and Energy Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon