Electro-discharge coating of AA 6062 using h-BN–Cu composite electrodes: surface, crystallographic and tribological characteristics
In this work, the surface modification of AA6062 alloy was investigated by using electro-discharge coating (EDC) with powder metallurgy-based h-BN–Cu composite electrodes with h-BN weight ratios of 70:30, 50:50 and 40:60. The effects of electrode composition, peak current and pulse-on-time on surface morphology, roughness, elemental transfer, phase constitution, crystallographic characteristics and tribological performance were evaluated. SEM and 3D optical profilometry showed composition- and parameter-dependent surface characteristics, with the lowest areal roughness (Sa) of about 2.5 µm achieved with the 50:50 electrode. EDS analysis showed an increase in boron content from 18.30 to 49.39 wt.% with increasing h-BN fraction. XRD showed reflections for h-BN and Cu. The 50:50 composition resulted in a compact coating, a crystallite size of 9.5 nm and a dislocation density of 38 × 10¹⁴ m−². EBSD showed a composition-dependent Cu texture intensity (3.870–4.793 MRD), a nearly constant h-BN texture, and strong grain-boundary misorientation peaks at 40°–50°. The 50:50 electrode also showed the lowest wear rate of 0.000246 mm³/N·m at 15 A and the lowest coefficient of friction of 0.233. The surface microhardness increased significantly from 87 HV for the uncoated alloy to 308 HV after coating.
Authors
- Sudhansu Ranjan Das (ORCID: https://orcid.org/0000-0003-2723-4459)
- Santosh Kumar Sahu (ORCID: https://orcid.org/0000-0002-9433-6618)
- Chitta Ranjan Sethi
Institutions
- Veer Surendra Sai University of Technology (IN)
Publication Details
- Journal
- Transactions of the IMF
- Published
- 2026-11-12
- DOI
- https://doi.org/10.1080/00202967.2026.2757540
- Primary Topic
- Surface Treatment and Coatings
- Type
- article
- Field-Weighted Citation Impact
- 0.00