Numerical Investigation of Underwater Collision Response and Damage Characteristics of Ring-Stiffened UUV Pressure Hulls

Accidental collisions can cause local denting and plastic deformation of underwater-vehicle pressure hulls, thereby compromising structural integrity and operational safety. Previous research has given limited attention to how ring frames carry collision loads and how local internal forces relate to overall hull deformation. This study numerically investigates the underwater collision response of a cylindrical unmanned underwater vehicle (UUV) pressure hull stiffened by regular and heavy T-section ring frames. The arbitrary Lagrangian–Eulerian (ALE) method is used to model the fluid–structure interaction during impact. The numerical procedures for structural collision response and hydrodynamic loading are validated against a published pressure-hull collision case and a wedge-impact test on a water-tank side plate, respectively. Parametric analyses are then performed for impact velocity, impact angle, axial impact location, and equal-area variations in ring-frame cross-sectional geometry. Local indentation, plastic deformation, ring-frame internal forces, and the partition of internal energy between the shell and ring frames are examined to clarify the effects of impact loading and the restraint provided by ring frames along the hull axis on damage evolution and deformation modes. Increasing impact velocity increases shell indentation and the extent of plastic deformation, whereas the maximum heavy-frame bending moment at maximum indentation changes little at higher impact velocities. Aligning the impact point with a heavy ring frame and increasing the overall frame-section height at a constant cross-sectional area both enhance the restraint provided by the frame system, increase the ring-frame share of structural internal energy, and reduce local shell indentation. These findings provide a basis for collision-resistant design, representative collision-scenario selection, and assessment of post-collision indentation and plastic deformation of ring-stiffened UUV pressure hulls.

Authors

Institutions

Publication Details

Journal
Applied Sciences
Published
2026-11-12
DOI
https://doi.org/10.3390/app162211222
Primary Topic
Structural Response to Dynamic Loads
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Numerical Investigation of Underwater Collision Response and Damage Characteristics of Ring-Stiffened UUV Pressure Hulls

Da Hui, Haoyang Kang, Chao Wang, Dong Song et al.
Applied Sciences
Structural Response to Dynamic Loads
article

Numerical Investigation of Underwater Collision Response and Damage Characteristics of Ring-Stiffened UUV Pressure Hulls

Da Hui, Haoyang Kang, Chao Wang, Dong Song, Shuangqiang Wang, Xu Yang, Zhiang Liu
article en

Abstract

Accidental collisions can cause local denting and plastic deformation of underwater-vehicle pressure hulls, thereby compromising structural integrity and operational safety. Previous research has given limited attention to how ring frames carry collision loads and how local internal forces relate to overall hull deformation. This study numerically investigates the underwater collision response of a cylindrical unmanned underwater vehicle (UUV) pressure hull stiffened by regular and heavy T-section ring frames. The arbitrary Lagrangian–Eulerian (ALE) method is used to model the fluid–structure interaction during impact. The numerical procedures for structural collision response and hydrodynamic loading are validated against a published pressure-hull collision case and a wedge-impact test on a water-tank side plate, respectively. Parametric analyses are then performed for impact velocity, impact angle, axial impact location, and equal-area variations in ring-frame cross-sectional geometry. Local indentation, plastic deformation, ring-frame internal forces, and the partition of internal energy between the shell and ring frames are examined to clarify the effects of impact loading and the restraint provided by ring frames along the hull axis on damage evolution and deformation modes. Increasing impact velocity increases shell indentation and the extent of plastic deformation, whereas the maximum heavy-frame bending moment at maximum indentation changes little at higher impact velocities. Aligning the impact point with a heavy ring frame and increasing the overall frame-section height at a constant cross-sectional area both enhance the restraint provided by the frame system, increase the ring-frame share of structural internal energy, and reduce local shell indentation. These findings provide a basis for collision-resistant design, representative collision-scenario selection, and assessment of post-collision indentation and plastic deformation of ring-stiffened UUV pressure hulls.

Applied SciencesVol. 16(22)
Northwestern Polytechnical University (CN), Dalian Maritime University (CN)
National Natural Science Foundation of China
Structural Response to Dynamic Loads
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon