Digital Twin-Enabled Multi-Sensor Framework for Intelligent Fault Diagnosis and Predictive Maintenance of Industrial Machinery

This paper presents a multi-sensor framework for condition monitoring and intelligent fault diagnosis in rotating industrial machinery, integrating heterogeneous sensing, machine-learning-based diagnosis, MQTT communication, historical data management, and a synchronized 3D Digital Twin. The experimental platform employs feature-level fusion by combining statistical and spectral descriptors extracted from vibration and acoustic signals with temporally aligned temperature and rotational-speed measurements to classify four machine-health states: Healthy, Minor, Moderate, and Severe. To assess the robustness of the diagnostic approach under different operating conditions, experiments were conducted at seven controlled operating frequencies ranging from 15 to 70 Hz. Sensor signals were segmented and characterized using statistical and spectral features, and seven supervised machine-learning classifiers were comparatively evaluated. The diagnostic contribution of sensor fusion was assessed through an ablation analysis, with classification accuracy increasing from 94.8% using vibration alone to 98.1% when vibration, acoustic, and temperature features were combined. Among the evaluated models, Random Forest achieved the highest overall classification performance, reaching 98.9% accuracy in the comparative evaluation. Under the stricter Leave-One-Operating-Frequency-Out validation, the model achieved a mean accuracy of 98.04 ± 0.48% and a mean Macro-F1 score of 97.94 ± 0.48%, demonstrating stable classification across unseen operating conditions. The architecture separates high-frequency signal acquisition and local processing from supervisory communication, with extracted features, diagnostic states, and selected signal blocks exchanged through MQTT for historical monitoring and Digital Twin synchronization. The MQTT supervisory layer achieved a mean communication latency of 21.8 ms, with no message loss observed during the reported 1000-message test sequence. Experimental results obtained from controlled imbalance and bearing-fault conditions demonstrate the feasibility of the proposed framework for multi-condition fault diagnosis and operator-oriented maintenance support. The developed platform provides an experimental basis for future cross-machine validation, prognostics, remaining-useful-life estimation, and bidirectional Digital Twin capabilities.

Authors

Institutions

Publication Details

Journal
Sensors
Published
2026-11-12
DOI
https://doi.org/10.3390/s26227161
Primary Topic
Machine Fault Diagnosis Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Digital Twin-Enabled Multi-Sensor Framework for Intelligent Fault Diagnosis and Predictive Maintenance of Industrial Machinery

Mohamed Tabaa, Mohamed Lamane, Abdelhafid Ait Elmahjoub, Zineb Hidila et al.
Sensors
Machine Fault Diagnosis Techniques
article

Digital Twin-Enabled Multi-Sensor Framework for Intelligent Fault Diagnosis and Predictive Maintenance of Industrial Machinery

Mohamed Tabaa, Mohamed Lamane, Abdelhafid Ait Elmahjoub, Zineb Hidila, Ayoub Fentis, Adnane Bouchra, Abdennaser Amana, Fatima-Ezzahra Labchiri
article en

Abstract

This paper presents a multi-sensor framework for condition monitoring and intelligent fault diagnosis in rotating industrial machinery, integrating heterogeneous sensing, machine-learning-based diagnosis, MQTT communication, historical data management, and a synchronized 3D Digital Twin. The experimental platform employs feature-level fusion by combining statistical and spectral descriptors extracted from vibration and acoustic signals with temporally aligned temperature and rotational-speed measurements to classify four machine-health states: Healthy, Minor, Moderate, and Severe. To assess the robustness of the diagnostic approach under different operating conditions, experiments were conducted at seven controlled operating frequencies ranging from 15 to 70 Hz. Sensor signals were segmented and characterized using statistical and spectral features, and seven supervised machine-learning classifiers were comparatively evaluated. The diagnostic contribution of sensor fusion was assessed through an ablation analysis, with classification accuracy increasing from 94.8% using vibration alone to 98.1% when vibration, acoustic, and temperature features were combined. Among the evaluated models, Random Forest achieved the highest overall classification performance, reaching 98.9% accuracy in the comparative evaluation. Under the stricter Leave-One-Operating-Frequency-Out validation, the model achieved a mean accuracy of 98.04 ± 0.48% and a mean Macro-F1 score of 97.94 ± 0.48%, demonstrating stable classification across unseen operating conditions. The architecture separates high-frequency signal acquisition and local processing from supervisory communication, with extracted features, diagnostic states, and selected signal blocks exchanged through MQTT for historical monitoring and Digital Twin synchronization. The MQTT supervisory layer achieved a mean communication latency of 21.8 ms, with no message loss observed during the reported 1000-message test sequence. Experimental results obtained from controlled imbalance and bearing-fault conditions demonstrate the feasibility of the proposed framework for multi-condition fault diagnosis and operator-oriented maintenance support. The developed platform provides an experimental basis for future cross-machine validation, prognostics, remaining-useful-life estimation, and bidirectional Digital Twin capabilities.

SensorsVol. 26(22)
École Marocaine des Sciences de l'Ingénieur (MA), University of Hassan II Casablanca (MA)
Industry, innovation and infrastructure
Machine Fault Diagnosis Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon