Tight drill-stem tests as in-situ matrix permeability tests: how much of the gas in a fractured quartzite can be produced? Attahaddy Field, Sirte Basin, Libya
Abstract In tight fractured gas reservoirs most of the gas is stored in the matrix, but the matrix permeability that controls whether this gas reaches the fractures is often below what routine core analysis can measure. In the Cambro-Ordovician Gargaf quartzite of the Attahaddy Field, Sirte Basin, Libya, 37 of 44 core plugs read zero permeability (below about 0.05 mD), so whether the gas in place can be produced has been unknown. We show that drill-stem tests (DSTs) that flowed little or nothing, usually dismissed as failures, help to answer this, because they test the rock between conductive fractures in situ. Pressure–time records of nine DSTs in seven wells (1987–1997) were recovered from scanned well files by optical character recognition and transcription, and analysed with gas pseudo-pressure and Bourdet derivatives. Gas tests flowing 5.5–11.7 MMcf/d give interval-average permeabilities of 0.26–4.5 mD (two of them lower bounds), and a weak test at least 0.11 mD, after an early derivative hump caused by wellbore storage and positive skin. The tight Gargaf test FF12 DST-2, which produced no fluid to surface, gives a lower bound of 1.6–2.6 µD; together with the core detection limit this brackets the permeability of the rock between flowing fractures at about 2–50 µD. A low-permeability test (FF21 DST-2, 5.5 µD) proves to overlap the productive zone of an earlier test in the same well, showing that low DST permeability can also reflect damage. A real-gas diffusion model of matrix blocks bounded by fractures, with block sizes from the conductive-fracture spacing inferred from 60 Gargaf DSTs (mean 383 ft; 218 ft and 559 ft in areas of bright and dim top-reservoir seismic amplitude), shows that even at the 2-µD lower bound about 90% of the matrix gas drains to the fractures within 30 years; the drained fraction would fall to 80% only below about 0.6 µD and to 50% below about 0.07 µD. With gas initially in place of 5.3 Tcf (P10–P90 3.7–7.4), 4.0 Tcf (2.8–5.7) is technically drainable to a 1,000 psia abandonment pressure for the bracketed permeability. Mapped with the 3D seismic, the main difference between bright and dim areas lies in reaching the fractures: an open interval needs about 500 ft to have a 90% chance of meeting a flowing fracture where the top reflection is bright, and about 1,300 ft where it is dim. Recovery in this field is therefore limited by how much of the fracture network is connected to wells, and by water entering through the fractures, rather than by the tightness of the matrix.
Authors
- Gheith Alfakri
Publication Details
- Journal
- Research Square
- Published
- 2026-11-12
- DOI
- https://doi.org/10.21203/rs.3.rs-11510669/v1
- Primary Topic
- Hydrocarbon exploration and reservoir analysis
- Type
- preprint