Eco-friendly geopolymer masonry units using ferrosilicon slag and Homra: experimental performance evaluation

Abstract The escalating environmental concerns associated with traditional clay brick manufacturing necessitate the development of sustainable, low-carbon alternatives. This study investigates the novel utilization of Ferrosilicon slag (FS) and Homra as primary precursors for producing geopolymer masonry units. The research aims to evaluate the synergistic effects of varying Homra dosages (0 H:1 S, 2 H:1 S, and 3 H:1 S ratios) and sodium hydroxide molarities (6, 8, and 10 M) on the physical, mechanical, and thermal performance of the geopolymer matrix. A comprehensive experimental program was conducted, including assessments of apparent porosity, water absorption, bulk density, compressive strength, and thermal conductivity up to 28 days of curing, supplemented by X-ray diffraction (XRD) and scanning electron microscopy (SEM) for microstructural characterization. The results reveal that incorporating Homra significantly enhances the densification of the geopolymer matrix. The 2 H:1 S formulation (66.7% Homra: 33.3% FS) activated at 10 M achieved optimal performance, yielding a 28-day compressive strength of approximately 9.2 MPa—a nearly 163% enhancement with respect to pure FS control—along with the lowest apparent porosity and water absorption. SEM and XRD analyses indicated the formation of a highly dense, amorphous N-A-S-H gel structure responsible for these improvements. Furthermore, all mixtures exhibited low thermal conductivity values (0.35–0.75 W/m·K), validating their suitability for insulation. The study concludes that the synergistic combination of FS and Homra offers a promising, eco-friendly approach for manufacturing high-performance masonry units, significantly contributing to waste valorization and circular economy principles in the construction industry.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-12
DOI
https://doi.org/10.1038/s41598-026-75015-z
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Eco-friendly geopolymer masonry units using ferrosilicon slag and Homra: experimental performance evaluation

Ahmed M. Ebid, Ayman Yousef, Menna Tarek Saleh, M. M. Ahmed
Scientific Reports
Concrete and Cement Materials Research
article

Eco-friendly geopolymer masonry units using ferrosilicon slag and Homra: experimental performance evaluation

Ahmed M. Ebid, Ayman Yousef, Menna Tarek Saleh, M. M. Ahmed
article en

Abstract

Abstract The escalating environmental concerns associated with traditional clay brick manufacturing necessitate the development of sustainable, low-carbon alternatives. This study investigates the novel utilization of Ferrosilicon slag (FS) and Homra as primary precursors for producing geopolymer masonry units. The research aims to evaluate the synergistic effects of varying Homra dosages (0 H:1 S, 2 H:1 S, and 3 H:1 S ratios) and sodium hydroxide molarities (6, 8, and 10 M) on the physical, mechanical, and thermal performance of the geopolymer matrix. A comprehensive experimental program was conducted, including assessments of apparent porosity, water absorption, bulk density, compressive strength, and thermal conductivity up to 28 days of curing, supplemented by X-ray diffraction (XRD) and scanning electron microscopy (SEM) for microstructural characterization. The results reveal that incorporating Homra significantly enhances the densification of the geopolymer matrix. The 2 H:1 S formulation (66.7% Homra: 33.3% FS) activated at 10 M achieved optimal performance, yielding a 28-day compressive strength of approximately 9.2 MPa—a nearly 163% enhancement with respect to pure FS control—along with the lowest apparent porosity and water absorption. SEM and XRD analyses indicated the formation of a highly dense, amorphous N-A-S-H gel structure responsible for these improvements. Furthermore, all mixtures exhibited low thermal conductivity values (0.35–0.75 W/m·K), validating their suitability for insulation. The study concludes that the synergistic combination of FS and Homra offers a promising, eco-friendly approach for manufacturing high-performance masonry units, significantly contributing to waste valorization and circular economy principles in the construction industry.

Scientific ReportsVol. 16(1)
Ain Shams University (EG), Future University in Egypt (EG), Jazan University (SA)
Future University in Egypt, Science and Technology Development Fund
Industry, innovation and infrastructure, Responsible consumption and production, Climate action, Sustainable cities and communities
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon