An Adaptive Optics Focus Corrector for a High-Intensity Beamline Sized by Actuator Count and Strehl Gain
This paper presents a computed design for a closed-loop adaptive optics corrector using a 97-actuator deformable mirror ahead of the focusing optic of a high-intensity beamline. The sizing follows from applying the relevant intensity, thermal, nonlinear and geometric bounds at a single stated operating point, with every number produced by a deposited computation. The headline result is an incoming aberration of 0.30 waves rms collapsing the Strehl ratio to 0.0286, correction to 0.07 waves rms restoring a Strehl ratio of 0.82, and therefore a focal intensity gain of about 29 at unchanged pulse energy and duration. The binding constraint is identified explicitly: corrector bandwidth against thermal drift in amplifier crystals, and coating damage if the mirror is placed where fluence is highest. The design is SIMULATED, NOT MEASURED: no hardware was built for this study, and all performance figures are predictions from stated assumptions, offered as a basis for a build decision and a measurement plan.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24155104
- Citations
- 1
- Primary Topic
- Adaptive optics and wavefront sensing
- Type
- article
- Field-Weighted Citation Impact
- 1.20