Bias-driven surface reconstruction of SnSSe into an active SnO/SnSSe interface for photoelectrochemical water oxidation
Photoelectrodes based on two-dimensional (2D) materials can undergo substantial surface reconstruction during photoelectrochemical (PEC) operation, although identifying the surface that actually mediates water oxidation remains challenging. Here, mixed-anion SnSSe nanosheets were used to determine how band-edge engineering and potential-dependent surface chemistry determine the working state of a tin-dichalcogenide photoanode. Comparison with the binary SnS 2 and SnSe 2 end members shows that SnSSe retains the layered CdI 2 -type structure after liquid-phase exfoliation while combining a visible-light optical gap of approximately 1.8 eV with a valence band maximum near −6.0 eV versus vacuum, providing the oxidative driving force required for photoanodic water oxidation. Wavelength-resolved PEC measurements in acidic, neutral, and alkaline electrolytes establish reproducible photoanodic operation with a ratiometric power-saved efficiency for OER of 1.27% in acidic electrolyte. The origin of this activity is resolved by combining density functional theory with four complementary X-ray photoelectron spectroscopy approaches, enabling operando and in situ spatially resolved analysis of individual exfoliated flakes, also under electrochemical polarization. Calculations show that pristine SnSSe is intrinsically limited by *OOH formation, whereas complete oxidation to an SnO 2 -like termination produces an energetically unfavorable OER pathway. In contrast, the formation of an under-oxidized SnO-like layer strongly alters the reaction energetics and generates the most favorable OER surface among the investigated states. Operando XPS directly identifies the corresponding SnO-like component under intermediate anodic polarization, predominantly within approximately 0.8–2.0 V versus RHE, while higher potentials promote Sn(IV)-rich SnO 2 formation and irreversible passivation. The results therefore identify a bias-selected SnO/SnSSe interface as the functional state of the photoanode and establish controlled surface reconstruction, rather than resistance to oxidation alone, as a design parameter for mixed-anion photoelectrodes for solar water splitting.
Authors
- Matteo Amati (ORCID: https://orcid.org/0000-0002-3809-2145)
- Silvia Nappini (ORCID: https://orcid.org/0000-0002-4944-5487)
- Crispin J. D. Hetherington (ORCID: https://orcid.org/0000-0002-4905-9965)
- C. S. Lue (ORCID: https://orcid.org/0000-0002-3074-9253)
- Péter S. Tóth (ORCID: https://orcid.org/0000-0003-1236-8390)
- Zygmunt Miłosz (ORCID: https://orcid.org/0000-0002-4938-9331)
- Ádám Balog (ORCID: https://orcid.org/0000-0001-9380-0899)
- Michael Vorochta (ORCID: https://orcid.org/0000-0001-8382-7027)
- Tsotne Dadiani (ORCID: https://orcid.org/0009-0008-5072-9453)
- Luca Gregoratti (ORCID: https://orcid.org/0000-0002-4947-2370)
- Csaba Janáky (ORCID: https://orcid.org/0000-0001-5965-5173)
- Tomáš Hrbek (ORCID: https://orcid.org/0000-0002-6041-2125)
- Federica Bondino (ORCID: https://orcid.org/0000-0001-6505-9319)
- Corneliu Ghica (ORCID: https://orcid.org/0000-0001-7110-1544)
- Antonio Politano (ORCID: https://orcid.org/0000-0002-4254-2102)
- Chia‐Nung Kuo (ORCID: https://orcid.org/0009-0008-1382-0610)
- Danil W. Boukhvalov (ORCID: https://orcid.org/0000-0002-2286-3443)
Institutions
- Nanjing Forestry University (CN)
- Lund University (SE)
- Satbayev University (KZ)
- Charles University (CZ)
- University of Szeged (HU)
- University of L'Aquila (IT)
- Elettra-Sincrotrone Trieste S.C.p.A. (IT)
- National Institute of Materials Physics (RO)
- Istituto Officina dei Materiali (IT)
- National Science and Technology Council (TW)
- Institute of Physics and Technology (KZ)
- National Cheng Kung University (TW)
Publication Details
- Journal
- Applied Surface Science Advances
- Published
- 2026-11-12
- DOI
- https://doi.org/10.1016/j.apsadv.2026.101098
- Primary Topic
- Advanced Photocatalysis Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00