Design and Strength Assessment of an Ice-Class Propeller Based on Ice-Resistance Matching and Rule-Based Ice Loads
An integrated design and strength-assessment method is developed for high ice-class propellers operating under low-speed, high-thrust icebreaking conditions. Icebreaking resistance predicted by the Lindqvist method is used to determine the propulsion demand and guide propeller-scale matching. The first-stage redesign retains the original 5.25 m propeller diameter as a retrofit constraint but exhibits significant hydrodynamic deterioration under heavily loaded behind-hull cavitating conditions. The diameter constraint is therefore relaxed, and a series-chart-based scale-rematching procedure using a reference thrust coefficient of KT ≈ 0.19 gives a redesigned diameter of 6.0 m. Its structural strength is evaluated under five rule-based ice-loading cases using finite-element analysis. The governing case produces a maximum equivalent stress of 249.68 MPa, a maximum displacement of 16.89 mm, and a safety factor of 1.63, exceeding the required value of 1.3. The results highlight the importance of coupling overall scale matching, hydrodynamic design, and ice-load strength assessment in high ice-class propeller design.
Authors
- Dengcheng Liu (ORCID: https://orcid.org/0000-0002-6431-8515)
- Kang Han (ORCID: https://orcid.org/0009-0008-6679-5105)
- Wei Rui
- Shengming CHANG
- Chao Wang
Institutions
- Harbin Engineering University (CN)
- China Ship Scientific Research Center (CN)
Publication Details
- Journal
- Journal of Marine Science and Engineering
- Published
- 2026-11-12
- DOI
- https://doi.org/10.3390/jmse14222146
- Primary Topic
- Ship Hydrodynamics and Maneuverability
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- China Ship Scientific Research Center