Vibro-electrical performance of nickel-clustered monocrystalline-silicon photovoltaic cells: A data-informed analytical modal study

Dynamic mechanical loading can initiate cracks, interconnect damage, and power loss in crystalline-silicon photovoltaic assemblies, yet the local vibration consequences of metallic impurity clusters inside a cell remain poorly quantified. This study combines previously published electrical and microstructural measurements for nickel-clustered monocrystalline-silicon cells [7] with a reproducible plate-vibration model. The records cover 600-1100 ℃ additional annealing, reported cluster-size intervals of 1-30 µm, open-circuit voltages of 480-506 mV, and short-circuit current densities of 20.2-45.7 mA cm-2. A 10 × 5 × 0.38 mm coupon was represented as a simply supported Kirchhoff-Love plate, with the unreported crystal orientation bracketed by silicon Young's moduli of 130-169 GPa. An independent Mindlin-Reissner eigenvalue calculation, including transverse shear and rotary inertia, predicted a first frequency 1.26% below the Kirchhoff-Love value. Pure-Ni inclusions and Reuss-Voigt stiffness bounds were retained as a conservative homogenization envelope. The Kirchhoff-Love first local bending frequency was 67.05-76.45 kHz. For the 900 ℃ condition with the highest UocJsc proxy calculated from the published data, the proxy was 2.190 times the control value, while the model predicted a first-mode shift of -0.0037% to -0.0040% for the midpoint morphology and -0.0006% to -0.0127% across its stated lower-upper morphology bounds. The maximum predicted reduction over the full feasible morphology domain was 3.051%. These calculations predict a small coupon-level modal effect under the stated geometry, support, and homogenization assumptions; they do not constitute experimental evidence of modal performance, fatigue resistance, or module-level vibration reliability.

Authors

Institutions

Publication Details

Journal
Sound&Vibration
Published
2026-11-12
DOI
https://doi.org/10.59400/sv4833
Primary Topic
Silicon and Solar Cell Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Vibro-electrical performance of nickel-clustered monocrystalline-silicon photovoltaic cells: A data-informed analytical modal study

A. V. Umarov, Elyor Saitov, Nurulla F. Zikrillaev, Hayrulla Zikrillaev et al.
Sound&Vibration
Silicon and Solar Cell Technologies
article

Vibro-electrical performance of nickel-clustered monocrystalline-silicon photovoltaic cells: A data-informed analytical modal study

A. V. Umarov, Elyor Saitov, Nurulla F. Zikrillaev, Hayrulla Zikrillaev, Khikmat Makhmudov, Nigora Usmanova, Sayfillo Nasriddinov
article en

Abstract

Dynamic mechanical loading can initiate cracks, interconnect damage, and power loss in crystalline-silicon photovoltaic assemblies, yet the local vibration consequences of metallic impurity clusters inside a cell remain poorly quantified. This study combines previously published electrical and microstructural measurements for nickel-clustered monocrystalline-silicon cells [7] with a reproducible plate-vibration model. The records cover 600-1100 ℃ additional annealing, reported cluster-size intervals of 1-30 µm, open-circuit voltages of 480-506 mV, and short-circuit current densities of 20.2-45.7 mA cm-2. A 10 × 5 × 0.38 mm coupon was represented as a simply supported Kirchhoff-Love plate, with the unreported crystal orientation bracketed by silicon Young's moduli of 130-169 GPa. An independent Mindlin-Reissner eigenvalue calculation, including transverse shear and rotary inertia, predicted a first frequency 1.26% below the Kirchhoff-Love value. Pure-Ni inclusions and Reuss-Voigt stiffness bounds were retained as a conservative homogenization envelope. The Kirchhoff-Love first local bending frequency was 67.05-76.45 kHz. For the 900 ℃ condition with the highest UocJsc proxy calculated from the published data, the proxy was 2.190 times the control value, while the model predicted a first-mode shift of -0.0037% to -0.0040% for the midpoint morphology and -0.0006% to -0.0127% across its stated lower-upper morphology bounds. The maximum predicted reduction over the full feasible morphology domain was 3.051%. These calculations predict a small coupon-level modal effect under the stated geometry, support, and homogenization assumptions; they do not constitute experimental evidence of modal performance, fatigue resistance, or module-level vibration reliability.

Sound&Vibration
Tashkent State Transport University (UZ), Astrakhan State Technical University (RU), Tashkent State Technical University named after Islam Karimov (UZ), Tashkent State University of Law (UZ), Uzbek National Institute of Metrology (UZ), University of Tashkent for Applied Sciences (UZ), National University of Uzbekistan (UZ)
Affordable and clean energy
Silicon and Solar Cell Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon