Modeling Parasitic Dynamics of a 3-DOF Gimbal-Style Attitude Test Rig

Ground-based attitude test rigs are essential for safely evaluating Unmanned Aerial Vehicle (UAV) flight controllers and mission performance, yet the parasitic inertia, mechanical coupling, and joint friction of the rig hardware often influence the vehicle’s true free-flight dynamics. In larger and heavier systems, the test rig can be considered transparent relative to the vehicle dynamics, but this approximation fails when both the vehicle and the rig systems have comparable dynamics. 3-DOF gimbal test rigs similar to the one used in this work require complex modeling due to their configuration-dependent dynamics. This paper addresses this challenge by presenting a framework for inertia and friction modeling. We analytically derive the configuration-dependent generalized inertia matrix and coupling terms as a function of measurable joint configurations, describing the nonlinear kinematic and dynamic relations between the rig link frames and the mounted vehicle. To validate accuracy, the derived analytical model, including the systemic Jacobians and reference frame transformations, is cross-validated against an independent Simscape Multibody model of the physical system with good agreement. The resulting system model supports estimation of the parasitic rig effects directly from rig measurements. The identified friction parameters were verified using independent free-decay experiments across all three axes. The resulting angular response RMS errors ranged from 2.11∘ to 7.06∘, cycle-frequency errors remained below 0.043 Hz, peak-to-peak amplitude RMS errors below 6.86∘, and logarithmic-decrement RMS errors below 0.13. The inertia matrix and the Coriolis matrix terms have also been validated numerically with relative Frobenius norm errors up to 0.25% and 14.29% respectively, and a combined response NRMSE of less than 4.69%. The same Simscape model is used to verify the estimated parameter simulation errors across multiple representative experiments. This work is a basis for a scalable framework of high-fidelity ground testing of advanced UAV systems.

Authors

Institutions

Publication Details

Journal
Machines
Published
2026-11-12
DOI
https://doi.org/10.3390/machines14111341
Primary Topic
Dynamics and Control of Mechanical Systems
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Modeling Parasitic Dynamics of a 3-DOF Gimbal-Style Attitude Test Rig

Ahmed Aboelezz, Beshoy Azab
Machines
Dynamics and Control of Mechanical Systems
article

Modeling Parasitic Dynamics of a 3-DOF Gimbal-Style Attitude Test Rig

Ahmed Aboelezz, Beshoy Azab
article en

Abstract

Ground-based attitude test rigs are essential for safely evaluating Unmanned Aerial Vehicle (UAV) flight controllers and mission performance, yet the parasitic inertia, mechanical coupling, and joint friction of the rig hardware often influence the vehicle’s true free-flight dynamics. In larger and heavier systems, the test rig can be considered transparent relative to the vehicle dynamics, but this approximation fails when both the vehicle and the rig systems have comparable dynamics. 3-DOF gimbal test rigs similar to the one used in this work require complex modeling due to their configuration-dependent dynamics. This paper addresses this challenge by presenting a framework for inertia and friction modeling. We analytically derive the configuration-dependent generalized inertia matrix and coupling terms as a function of measurable joint configurations, describing the nonlinear kinematic and dynamic relations between the rig link frames and the mounted vehicle. To validate accuracy, the derived analytical model, including the systemic Jacobians and reference frame transformations, is cross-validated against an independent Simscape Multibody model of the physical system with good agreement. The resulting system model supports estimation of the parasitic rig effects directly from rig measurements. The identified friction parameters were verified using independent free-decay experiments across all three axes. The resulting angular response RMS errors ranged from 2.11∘ to 7.06∘, cycle-frequency errors remained below 0.043 Hz, peak-to-peak amplitude RMS errors below 6.86∘, and logarithmic-decrement RMS errors below 0.13. The inertia matrix and the Coriolis matrix terms have also been validated numerically with relative Frobenius norm errors up to 0.25% and 14.29% respectively, and a combined response NRMSE of less than 4.69%. The same Simscape model is used to verify the estimated parameter simulation errors across multiple representative experiments. This work is a basis for a scalable framework of high-fidelity ground testing of advanced UAV systems.

MachinesVol. 14(11)
University of Maine (US)
National Science Foundation
Dynamics and Control of Mechanical Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon