Valorization of Cashew Industry Waste into Anacardate-Based Green Foaming Agents for Foam Concrete Applications

Abstract Traditional foaming agents and foam concrete rely on synthetic chemicals and ordinary portland cement (OPC) with a high carbon footprint. This paper presents the formulation of novel anacardate-based green foaming agents derived from cashew industry waste to address the environmental concerns associated with synthetic surfactants. Unsaturated and saturated anacardic acids were extracted and modified using sodium and potassium-based alkalis to synthesize anionic surfactants. The salts of unsaturated anacardic acid-ene mixture demonstrated superior foaming capabilities over their saturated counterparts, which exhibited unfavorable gelling behavior in an aqueous solution. This is beneficial considering the economy and sustainability; as an intermediate, extracting unsaturated anacardic acid is straightforward, less energy-intensive, and more cost-efficient than extracting saturated anacardic acid. Disodium anacardate (unsaturated) yielded foam with favorable density and stability but required further stabilization for use in foam concrete. Thus, three polymer admixtures, namely, xanthan gum, guar gum, and sodium carboxymethyl cellulose (Na-CMC), were investigated. Xanthan gum showed maximum viscosity enhancement of foaming solution and foam stabilization, followed by Na-CMC and guar gum. The compatibility of the stabilized disodium anacardate (unsaturated) foaming agents with both OPC and geopolymer binders was evaluated in terms of reaction kinetics, fresh-state stability, compressive strength, and water absorption. Isothermal calorimetry results confirmed that the anacardate-based foaming agent did not retard binder reactions, irrespective of the admixture used. Further, geopolymer foam concrete exhibited higher compressive strength and lower water absorption than OPC-based mixes at comparable densities, indicating a better synergy. Thus, anacardate-based foams offer a viable, sustainable alternative to synthetic surfactants in foam concrete.

Authors

Institutions

Publication Details

Journal
Journal of Materials in Civil Engineering
Published
2026-11-06
DOI
https://doi.org/10.1061/jmcee7.mteng-23705
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Valorization of Cashew Industry Waste into Anacardate-Based Green Foaming Agents for Foam Concrete Applications

Shubham Raj, Keshavamurthy Ramamurthy, Indrapal Singh Aidhen
Journal of Materials in Civil Engineering
Concrete and Cement Materials Research
article

Valorization of Cashew Industry Waste into Anacardate-Based Green Foaming Agents for Foam Concrete Applications

Shubham Raj, Keshavamurthy Ramamurthy, Indrapal Singh Aidhen
article en

Abstract

Abstract Traditional foaming agents and foam concrete rely on synthetic chemicals and ordinary portland cement (OPC) with a high carbon footprint. This paper presents the formulation of novel anacardate-based green foaming agents derived from cashew industry waste to address the environmental concerns associated with synthetic surfactants. Unsaturated and saturated anacardic acids were extracted and modified using sodium and potassium-based alkalis to synthesize anionic surfactants. The salts of unsaturated anacardic acid-ene mixture demonstrated superior foaming capabilities over their saturated counterparts, which exhibited unfavorable gelling behavior in an aqueous solution. This is beneficial considering the economy and sustainability; as an intermediate, extracting unsaturated anacardic acid is straightforward, less energy-intensive, and more cost-efficient than extracting saturated anacardic acid. Disodium anacardate (unsaturated) yielded foam with favorable density and stability but required further stabilization for use in foam concrete. Thus, three polymer admixtures, namely, xanthan gum, guar gum, and sodium carboxymethyl cellulose (Na-CMC), were investigated. Xanthan gum showed maximum viscosity enhancement of foaming solution and foam stabilization, followed by Na-CMC and guar gum. The compatibility of the stabilized disodium anacardate (unsaturated) foaming agents with both OPC and geopolymer binders was evaluated in terms of reaction kinetics, fresh-state stability, compressive strength, and water absorption. Isothermal calorimetry results confirmed that the anacardate-based foaming agent did not retard binder reactions, irrespective of the admixture used. Further, geopolymer foam concrete exhibited higher compressive strength and lower water absorption than OPC-based mixes at comparable densities, indicating a better synergy. Thus, anacardate-based foams offer a viable, sustainable alternative to synthetic surfactants in foam concrete.

Journal of Materials in Civil EngineeringVol. 39(3)
Indian Institute of Technology Madras (IN), Central Road Research Institute (IN), Council of Scientific and Industrial Research (IN)
Responsible consumption and production
Openalex Percentile: Top 21%
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon