Ionic‐Bonding Engineering of Metastable CoMoO 4 for Durable Oxygen Evolution Electrocatalysis

ABSTRACT Thermodynamically metastable materials with high‐energy crystal structures have emerged as promising electrocatalyst candidates owing to their structural and electronic flexibility, offering viable route to reduce dependence on noble‐metal‐based catalysts. Among them, CoMoO 4 , which exhibits phase‐dependent Mo‐O polyhedral frameworks in α‐ and β‐polymorphs, has attracted considerable attention as an oxygen evolution reaction (OER) catalyst. However, its practical application is limited by structural instability arising from labile metal‐oxygen framework during repetitive electrochemical operation. Herein, we report pnictogen‐doping strategy using Sb and Bi to stabilize metastable CoMoO 4 by modulating the local metal‐oxygen bonding environment while preserving high OER activity. The doped CoMoO 4 catalysts delivered a high current density of approximately 230 mA cm −2 at 2.0 V in 1 M KOH. In particular, Sb‐doped β‐CoMoO 4 exhibited enhanced electrochemical durability, retaining 93% of its initial current density after 1000 cycles, whereas pristine β‐CoMoO 4 retained only 64%. Sb‐doped β‐CoMoO 4 also showed lower operating potential at 10 mA cm −2 than pristine β‐CoMoO 4 , decreasing from 1.34 to 1.29 V. In addition, the quasi‐redox peak associated with the Co 2+ /Co 3+ transition near 1.1 V, which is related to CoOOH formation and concurrent Co/Mo cation dissolution during the OER process, was effectively suppressed by doping with Sb or Bi. These results indicate that pnictogen doping enhances the structural robustness of metastable CoMoO 4 by strengthening the metal‐oxygen bonding framework and mitigating cation leaching during electrochemical cycling. Overall, this work demonstrates that ionic‐bonding engineering is effective strategy for stabilizing metastable oxide electrocatalysts while maintaining or slightly enhancing OER performance. These findings provide useful guidance for designing fatigue‐tolerant, noble‐metal‐free electrocatalysts for practical water‐splitting applications.

Authors

Institutions

Publication Details

Journal
EcoEnergy
Published
2026-11-02
DOI
https://doi.org/10.1002/ece2.70174
Primary Topic
Electrocatalysts for Energy Conversion
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Ionic‐Bonding Engineering of Metastable CoMoO 4 for Durable Oxygen Evolution Electrocatalysis

Changhyun Jin, Kyu Hyoung Lee, Jeong Yun Hwang, Se Hwang Kang et al.
EcoEnergy
Electrocatalysts for Energy Conversion
article

Ionic‐Bonding Engineering of Metastable CoMoO 4 for Durable Oxygen Evolution Electrocatalysis

Changhyun Jin, Kyu Hyoung Lee, Jeong Yun Hwang, Se Hwang Kang, Seung Yong Lee, Si Hoon Jeong, Myung Sik Choi, Chul Oh Park, Min Yeop Lee, Sol Han
article en

Abstract

ABSTRACT Thermodynamically metastable materials with high‐energy crystal structures have emerged as promising electrocatalyst candidates owing to their structural and electronic flexibility, offering viable route to reduce dependence on noble‐metal‐based catalysts. Among them, CoMoO 4 , which exhibits phase‐dependent Mo‐O polyhedral frameworks in α‐ and β‐polymorphs, has attracted considerable attention as an oxygen evolution reaction (OER) catalyst. However, its practical application is limited by structural instability arising from labile metal‐oxygen framework during repetitive electrochemical operation. Herein, we report pnictogen‐doping strategy using Sb and Bi to stabilize metastable CoMoO 4 by modulating the local metal‐oxygen bonding environment while preserving high OER activity. The doped CoMoO 4 catalysts delivered a high current density of approximately 230 mA cm −2 at 2.0 V in 1 M KOH. In particular, Sb‐doped β‐CoMoO 4 exhibited enhanced electrochemical durability, retaining 93% of its initial current density after 1000 cycles, whereas pristine β‐CoMoO 4 retained only 64%. Sb‐doped β‐CoMoO 4 also showed lower operating potential at 10 mA cm −2 than pristine β‐CoMoO 4 , decreasing from 1.34 to 1.29 V. In addition, the quasi‐redox peak associated with the Co 2+ /Co 3+ transition near 1.1 V, which is related to CoOOH formation and concurrent Co/Mo cation dissolution during the OER process, was effectively suppressed by doping with Sb or Bi. These results indicate that pnictogen doping enhances the structural robustness of metastable CoMoO 4 by strengthening the metal‐oxygen bonding framework and mitigating cation leaching during electrochemical cycling. Overall, this work demonstrates that ionic‐bonding engineering is effective strategy for stabilizing metastable oxide electrocatalysts while maintaining or slightly enhancing OER performance. These findings provide useful guidance for designing fatigue‐tolerant, noble‐metal‐free electrocatalysts for practical water‐splitting applications.

EcoEnergy
Yonsei University (KR), Kongju National University (KR), Kyungpook National University (KR), Institute for Advanced Engineering (KR)
Openalex Percentile: Top 36%
Electrocatalysts for Energy Conversion
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon