Optimizing the cascading factor for digital phase restoration in a 100 km free-space FMCW synthetic aperture ladar
Digital phase concatenation can extend the usable coherence length of frequency-modulated continuous-wave synthetic aperture ladar (FMCW SAL), but it also accumulates reference-channel noise. We examine this trade-off over a 101.8 km free-space link using five reference fiber delay lines (FDLs) from 5 to 25 km. The implemented processing indices range from N proc =27 to 5, corresponding to 28 to six reference terms. The 25 km FDL gave the lowest residual phase variance and the highest peak-to-sidelobe ratio (PSLR) and image contrast among the tested configurations. Its best cube yielded 0.31rad 2 , 14.38 dB, and 39.62, respectively, with near-transform-limited azimuth focusing. Across five cubes, the residual variance was 0.55±0.15rad 2 (mean ± sample standard deviation), and all five met the selected 1rad 2 phase-variance threshold. Every cube from the other configurations exceeded this threshold. The field results are consistent with reference-noise accumulation but do not establish its linear dependence on term count. A model-based numerical illustration and an analytical comparison describe the effects of term count and fiber attenuation. These results identify a suitable reference delay for the tested system; longer FDLs and N proc <5 remain untested.
Authors
- Changjun Ke (ORCID: https://orcid.org/0000-0001-6438-2456)
- Ziqi Song
- Yunsong Liang
- Di Mo (ORCID: https://orcid.org/0000-0003-2763-9077)
- Hongyu Xiao
- Jie Li
- Zhuang Wu
Institutions
- University of Chinese Academy of Sciences (CN)
Publication Details
- Journal
- Applied Optics
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1364/ao.614858
- Primary Topic
- Advanced SAR Imaging Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00