The role of soot oxidation on the optimization of chitosan/soot aerogel beads for heavy metals and dyes adsorption
obtained with the CS : soot-ox 1 : 2 sample at 50 °C), highlighting the contribution of carbonaceous aromatic domains and oxygen-containing surface functionalities to dye adsorption. Kinetic and equilibrium adsorption measurements indicated heterogeneous adsorption behavior, well described by the Elovich and Toth models, respectively. Regeneration tests further indicated that beads containing oxidized soot preserved their removal ability over repeated cycles more effectively than neat chitosan, particularly for R6G. Overall, this study shows that soot oxidation and CS : soot ratio can be used as simple design parameters to tailor chitosan-based aerogel beads toward different classes of water pollutants, combining waste-carbon valorization with reusable biopolymer adsorbents.
Authors
- Martina Salzano de Luna (ORCID: https://orcid.org/0000-0003-0600-3133)
- Shehryar Ahmad (ORCID: https://orcid.org/0000-0002-2747-5212)
- George Z. Kyzas (ORCID: https://orcid.org/0000-0003-1516-3761)
- Konstantinos N. Maroulas (ORCID: https://orcid.org/0009-0002-7597-7505)
- Mariano Sirignano (ORCID: https://orcid.org/0000-0003-4363-7194)
Institutions
- Democritus University of Thrace (GR)
- National Interuniversity Consortium of Materials Science and Technology (IT)
- University of Naples Federico II (IT)
Publication Details
- Journal
- RSC Advances
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1039/d6ra09330b
- Primary Topic
- Adsorption and biosorption for pollutant removal
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Ministero dell’Istruzione, dell’Università e della Ricerca