Effect of skin disinfectants on the color stability of maxillofacial silicone elastomers: an in-vitro study

Although daily chemical disinfection is crucial for preventing biofilm formation on maxillofacial silicone prostheses, it frequently induces material degradation and color instability. Therefore, this study aimed to evaluate the effects of various skin and mucosal disinfectants on the color stability of three maxillofacial silicone elastomers. 180 disk-shaped specimens were fabricated from three addition-cured platinum silicones: M511, TechSil S-25, and Z004. The specimens were pigmented to simulate a skin color and randomly divided into six groups based on the disinfectant used: distilled water (control), hypochlorous acid, 67.2% ethyl alcohol, micellar water (cationic surfactant), and two multi-purpose contact lens solutions (containing alexidine dihydrochloride and polyquaternium-1). A 12-month clinical use simulation was conducted over 2 months, with specimens spray-disinfected 6 times daily. Color coordinates were measured before and after disinfection using a digital spectrophotometer, and color change values were calculated using the CIEDE2000 formula. Data were analyzed using two-way ANOVA and Tukey HSD tests (α = 0.05). There was no significant interaction between silicone type and disinfectant type factors. However, the main effects of both factors were significant ( P < 0.05). Z004 demonstrated significantly higher color stability than M511 and Techsil S-25. Among the disinfectants, hypochlorous acid produced the most remarkable mean color change, whereas the multi-purpose contact lens solutions produced the least. Notably, all recorded values remained below the clinically perceptible threshold (0.7). Multi-purpose contact lens solutions and micellar water may be promising candidates for future investigation as cleaning agents for maxillofacial prostheses, given their minimal impact on color. Also, all recorded values were below the visual perceptibility threshold (ΔE 00 = 0.7) over a simulated 12-month period.

Authors

Institutions

Publication Details

Journal
BMC Oral Health
Published
2026-10-30
DOI
https://doi.org/10.1186/s12903-026-10289-3
Primary Topic
Dental materials and restorations
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Effect of skin disinfectants on the color stability of maxillofacial silicone elastomers: an in-vitro study

Bilge Turhan Bal, Gökçe Ünsal, Merve Bankoğlu Güngör, Nurdan Bastem Gülmez et al.
3 links
BMC Oral Health
Dental materials and restorations
article

Effect of skin disinfectants on the color stability of maxillofacial silicone elastomers: an in-vitro study

Bilge Turhan Bal, Gökçe Ünsal, Merve Bankoğlu Güngör, Nurdan Bastem Gülmez, Seçil Karakoca Nemli̇
article en

Abstract

Although daily chemical disinfection is crucial for preventing biofilm formation on maxillofacial silicone prostheses, it frequently induces material degradation and color instability. Therefore, this study aimed to evaluate the effects of various skin and mucosal disinfectants on the color stability of three maxillofacial silicone elastomers. 180 disk-shaped specimens were fabricated from three addition-cured platinum silicones: M511, TechSil S-25, and Z004. The specimens were pigmented to simulate a skin color and randomly divided into six groups based on the disinfectant used: distilled water (control), hypochlorous acid, 67.2% ethyl alcohol, micellar water (cationic surfactant), and two multi-purpose contact lens solutions (containing alexidine dihydrochloride and polyquaternium-1). A 12-month clinical use simulation was conducted over 2 months, with specimens spray-disinfected 6 times daily. Color coordinates were measured before and after disinfection using a digital spectrophotometer, and color change values were calculated using the CIEDE2000 formula. Data were analyzed using two-way ANOVA and Tukey HSD tests (α = 0.05). There was no significant interaction between silicone type and disinfectant type factors. However, the main effects of both factors were significant ( P < 0.05). Z004 demonstrated significantly higher color stability than M511 and Techsil S-25. Among the disinfectants, hypochlorous acid produced the most remarkable mean color change, whereas the multi-purpose contact lens solutions produced the least. Notably, all recorded values remained below the clinically perceptible threshold (0.7). Multi-purpose contact lens solutions and micellar water may be promising candidates for future investigation as cleaning agents for maxillofacial prostheses, given their minimal impact on color. Also, all recorded values were below the visual perceptibility threshold (ΔE 00 = 0.7) over a simulated 12-month period.

BMC Oral Health
Ankara Yıldırım Beyazıt University (TR), Gazi University (TR)
Good health and well-being
Openalex Percentile: Top 10%
Dental materials and restorations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon