Effects of membrane stress on frequency of tunable 1060 nm MEMS-VCSELs
A 1060 nm micro-electro-mechanical systems (MEMS) tunable vertical-cavity surface-emitting laser (VCSEL) is demonstrated with a movable distributed Bragg reflector (DBR). SiN x dielectric films of different residual stresses are prepared on a half-VCSEL with a Ge sacrificial layer by plasma-enhanced chemical vapor deposition. Suspended DBR mirrors supported by SiN x MEMS membranes are released by undercutting the Ge layer, and well-formed MEMS structures are achieved when the SiN x film is tensile-stressed. The frequency response of the bridge-type MEMS structure is characterized using a laser Doppler vibrometer, and it indicates that the resonant frequency and -3 dB bandwidth rise from 460 kHz and 646 kHz to 710 kHz and 890 kHz, respectively, as the tensile stress in SiN x is increased from 109 MPa to 302 MPa. Consequently, VCSELs with a SiN x membrane of optimized stress show a continuous single-longitudinal-mode tuning range of 97 nm. These findings demonstrate that residual stress in SiN x films has a significant effect not only on the structural stability but also on the frequency response of MEMS-VCSELs.
Authors
- Hua Qin (ORCID: https://orcid.org/0000-0003-4885-0963)
- 朱鲁江 Zhu Lujiang
- Jianrong Dong
- Shangping Xiao
- Qi Zhang
- Yurun Sun
- suzhen Yu
Institutions
- Chinese Academy of Sciences (CN)
- Suzhou Institute of Nano-tech and Nano-bionics (CN)
Publication Details
- Journal
- Optics Express
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1364/oe.607357
- Primary Topic
- Semiconductor Lasers and Optical Devices
- Type
- article
- Field-Weighted Citation Impact
- 0.00