Development and characterization of formaldehyde-free particleboards using Detarium senegalense seed powder as an environmentally friendly bio-binder
Abstract This study evaluates the potential of Detarium senegalense seed powder as an all-natural binder for the processing of particleboard without the use of formaldehyde. The aim of the study was to investigate the feasibility of using Detarium senegalense seed powder as a natural binder for the production of particleboard with sawdust as a reinforcing material without formaldehyde. Particleboards were produced using a low-energy cold pressing technology with a binder content of 10, 20, and 30 wt% and then characterized for their chemical, physical, mechanical, and morphological properties. FTIR spectroscopy analysis revealed the presence of hydroxyl, amide, carbonyl, and glycoside functional groups in the bio-binder, which are observed as polysaccharides and proteins, indicating the presence of adhesive properties in the bio-binder. Adding a higher binder content resulted in an increase in density from 576.67 ± 35.12 kg/m³ to 872.78 ± 80.70 kg/m³. The formulation with 10% binder content had low water resistance and disintegrated in water, while the formulation with 30% content had the lowest water absorption (59.43 ± 5.90%). Scanning electron microscopy also revealed an increase in matrix continuity, an increase in interfacial adhesion, and a decrease in void content with an increase in binder content. The results showed that Detarium senegalense seed powder can be used as an alternative renewable bio-binder for particleboard production, and that the formulation with 30% seed powder content is the most promising. This study demonstrates the potential of underutilized tropical bio-resources as a basis for sustainable wood composites and green building materials.
Authors
- Abubakar Sadiq Imam (ORCID: https://orcid.org/0009-0007-2155-6314)
- Kennedy Sarangapani
- Kamesh Bodduru
- L.A.M Kolo
Institutions
- University of Maiduguri (NG)
- Sharda University (IN)
Publication Details
- Journal
- Journal of Adhesion Science and Technology
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1080/01694243.2026.2763058
- Primary Topic
- Wood Treatment and Properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Sharda University