Development and Validation of Quasi-Dimensional Multi-Zone Combustion Model for Homogeneous Reactivity-Controlled Compression Ignition with Renewable Fuels—Part 2: Complete Model and Validation

As a part of the project, the homogeneous reactivity-controlled compression ignition (hRCCI) concept is being investigated along with the development of 0D/1D combustion simulation models. The proposed concept employs early direct injection of octanol as the high-reactivity fuel in combination with port fuel injection of ethanol as the low-reactivity fuel. In the previous parts of the publication, testing results and the in-cylinder fuel and temperature distribution predictions were studied. Low-temperature combustion (LTC) concepts such as hRCCI are strongly governed by autoignition chemistry of the fuels and oxidizer, making the explicit consideration of chemical kinetics essential for predictive simulations. In addition, the hRCCI combustion process exhibits high sensitivity to a wide range of control parameters, including intake temperature, intake pressure, excess air ratio, premixed fuel ratio, and direct injection parameters, posing further challenges to model robustness. To address these challenges, a predictive and robust quasi-dimensional multi-zone combustion model for LTC engines is developed. The model couples a 0D/1D flow framework implemented in GT-POWER with detailed chemical kinetics solved using a Python–Cantera interface for user-defined combustion modeling. The combustion framework incorporates dedicated sub-models to account for fuel evaporation, interzonal heat transfer, wall heat transfer, spatial distribution of directly injected octanol, and temperature stratification across the zones. The model’s predictive capability is validated against experimental data from a single-cylinder research engine under variations in intake pressure, intake temperature, premixed ratio, and the start of direct octanol injection. The simulation results show strong agreement with experimental measurements, demonstrating the robustness and predictive accuracy of the developed modeling approach. The proposed simulation framework provides a valuable tool for the future development and optimization of low-temperature combustion engine concepts aimed at improving efficiency and reducing emissions.