From Conceptual Design to Flight Testing: Multidisciplinary Development and Verification of a Class I Mini-UAV

This paper presents the end-to-end multidisciplinary development and flight-test assessment of a Class I fixed-wing mini-unmanned aerial vehicle (UAV) designed for surveillance and reconnaissance missions. The development process progresses from mission and system-level requirements through conceptual, preliminary, and detailed design, followed by prototype fabrication and experimental flight testing. Conceptual design establishes aircraft mass, wing and power loading, aerodynamic configuration, wing geometry, airfoil selection, mass distribution, and initial stability characteristics. The preliminary and detailed stages progressively increase analysis fidelity through assessments of aerodynamics, structures, aeroelasticity, propulsion, stability and control, performance, and thermal management. High-fidelity Computational Fluid Dynamics (CFD) analyses are performed in ANSYS Fluent for aerodynamic characterization and load prediction, while the finite-element (FE) structural and aeroelastic analyses are performed in MSC Patran/Nastran to assess strength, stiffness, buckling, and static and dynamic aeroelastic behavior. The aircraft configuration incorporates a V-tail, electric pusher propulsion, composite structural components, integrated control surfaces, wingtip devices, and dedicated cooling arrangements. A representative 3D-printed flight-test article retaining the principal aerodynamic architecture was subsequently evaluated in climb, straight-and-level flight, sustained turns, and low-speed operation. The vehicle exhibited stable and predictable handling throughout the tested envelope. Flight-derived aerodynamic trends were compared with the detailed-design CFD database, showing drag-coefficient differences below approximately 3% in straight-and-level flight and 1.5% during climb, with larger discrepancies reaching approximately 16% in sustained turns. These results provide a useful consistency assessment of the numerical predictions, although the use of GPS-derived ground speed and propulsion-model-based thrust limits their interpretation as a direct aerodynamic validation. Overall, this study demonstrates a traceable progressive-fidelity methodology for advancing a mini-UAV from requirements and conceptual sizing to multidisciplinary verification and prototype-level flight assessment.

Authors

Publication Details

Journal
Applied Sciences
Published
2026-11-16
DOI
https://doi.org/10.3390/app162211360
Primary Topic
Aerospace and Aviation Technology
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

From Conceptual Design to Flight Testing: Multidisciplinary Development and Verification of a Class I Mini-UAV

Panagiota Kelverkloglou, Spyridon Kilimtzidis, Θωμάς Ζάραγκας, Eleftherios Nikolaou et al.
1 links
Applied Sciences
Aerospace and Aviation Technology
article

From Conceptual Design to Flight Testing: Multidisciplinary Development and Verification of a Class I Mini-UAV

Panagiota Kelverkloglou, Spyridon Kilimtzidis, Θωμάς Ζάραγκας, Eleftherios Nikolaou, Spyridon Alexopoulos, Vassilis Kostopoulos
article en

Abstract

This paper presents the end-to-end multidisciplinary development and flight-test assessment of a Class I fixed-wing mini-unmanned aerial vehicle (UAV) designed for surveillance and reconnaissance missions. The development process progresses from mission and system-level requirements through conceptual, preliminary, and detailed design, followed by prototype fabrication and experimental flight testing. Conceptual design establishes aircraft mass, wing and power loading, aerodynamic configuration, wing geometry, airfoil selection, mass distribution, and initial stability characteristics. The preliminary and detailed stages progressively increase analysis fidelity through assessments of aerodynamics, structures, aeroelasticity, propulsion, stability and control, performance, and thermal management. High-fidelity Computational Fluid Dynamics (CFD) analyses are performed in ANSYS Fluent for aerodynamic characterization and load prediction, while the finite-element (FE) structural and aeroelastic analyses are performed in MSC Patran/Nastran to assess strength, stiffness, buckling, and static and dynamic aeroelastic behavior. The aircraft configuration incorporates a V-tail, electric pusher propulsion, composite structural components, integrated control surfaces, wingtip devices, and dedicated cooling arrangements. A representative 3D-printed flight-test article retaining the principal aerodynamic architecture was subsequently evaluated in climb, straight-and-level flight, sustained turns, and low-speed operation. The vehicle exhibited stable and predictable handling throughout the tested envelope. Flight-derived aerodynamic trends were compared with the detailed-design CFD database, showing drag-coefficient differences below approximately 3% in straight-and-level flight and 1.5% during climb, with larger discrepancies reaching approximately 16% in sustained turns. These results provide a useful consistency assessment of the numerical predictions, although the use of GPS-derived ground speed and propulsion-model-based thrust limits their interpretation as a direct aerodynamic validation. Overall, this study demonstrates a traceable progressive-fidelity methodology for advancing a mini-UAV from requirements and conceptual sizing to multidisciplinary verification and prototype-level flight assessment.

Applied SciencesVol. 16(22)
Aerospace and Aviation Technology
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon