Hydro-Thermo-Mechanical Response and Deformation Characteristics of Reinforced Soil Retaining Walls in Seasonally Frozen Regions Under a Sequential Freeze–Thaw–Dynamic Loading Path

The hydro-thermo-mechanical state and deformation of reinforced soil retaining walls in seasonally frozen regions evolve continuously under sequential freeze–thaw action and traffic loading. In a 1:4 laboratory-scale model test, the same retaining wall model underwent three freeze–thaw cycles without an external water supply. The F1 and F2 loading stages were conducted during thawing in the second and third cycles, respectively. In each stage, sinusoidal dynamic loads were applied in a fixed sequence of 1, 4, and 7 Hz. Temperature, water content, earth pressure, acceleration, and wall-facing displacement were recorded synchronously. During freezing, the subzero-temperature zone extended into the wall from the top surface and the facing side, forming an approximately L-shaped pattern. During thawing, the boundaries warmed before the wall interior. By the end of the first thawing observation period, the subzero-temperature zone had disappeared from the monitored cross-section, but the vertical additional earth pressure at a depth of 150 mm remained at approximately 47% of its peak during the preceding freezing stage, indicating that additional earth pressure recovery lagged behind warming. The increases from F1 to F2 in vertical additional earth pressure increments and acceleration responses occurred mainly in the upper part of the wall and coincided with further outward displacement of the upper facing. At an elevation of 650 mm, wall-facing displacement at the end of freezing increased from approximately 0.42 mm in the first cycle to approximately 1.10 mm in the third cycle. The wall-facing deformation gradually evolved from predominantly local bulging in the middle portion to a combination of overall outward tilting and local bulging.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-18
DOI
https://doi.org/10.3390/ma19224876
Primary Topic
Geotechnical Engineering and Soil Stabilization
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Hydro-Thermo-Mechanical Response and Deformation Characteristics of Reinforced Soil Retaining Walls in Seasonally Frozen Regions Under a Sequential Freeze–Thaw–Dynamic Loading Path

Yingjie Chen, Qinli Liu, Jie Liu, Chongjin Guo et al.
1 links
Materials
Geotechnical Engineering and Soil Stabilization
article

Hydro-Thermo-Mechanical Response and Deformation Characteristics of Reinforced Soil Retaining Walls in Seasonally Frozen Regions Under a Sequential Freeze–Thaw–Dynamic Loading Path

Yingjie Chen, Qinli Liu, Jie Liu, Chongjin Guo, g, Changtao Hu
article en

Abstract

The hydro-thermo-mechanical state and deformation of reinforced soil retaining walls in seasonally frozen regions evolve continuously under sequential freeze–thaw action and traffic loading. In a 1:4 laboratory-scale model test, the same retaining wall model underwent three freeze–thaw cycles without an external water supply. The F1 and F2 loading stages were conducted during thawing in the second and third cycles, respectively. In each stage, sinusoidal dynamic loads were applied in a fixed sequence of 1, 4, and 7 Hz. Temperature, water content, earth pressure, acceleration, and wall-facing displacement were recorded synchronously. During freezing, the subzero-temperature zone extended into the wall from the top surface and the facing side, forming an approximately L-shaped pattern. During thawing, the boundaries warmed before the wall interior. By the end of the first thawing observation period, the subzero-temperature zone had disappeared from the monitored cross-section, but the vertical additional earth pressure at a depth of 150 mm remained at approximately 47% of its peak during the preceding freezing stage, indicating that additional earth pressure recovery lagged behind warming. The increases from F1 to F2 in vertical additional earth pressure increments and acceleration responses occurred mainly in the upper part of the wall and coincided with further outward displacement of the upper facing. At an elevation of 650 mm, wall-facing displacement at the end of freezing increased from approximately 0.42 mm in the first cycle to approximately 1.10 mm in the third cycle. The wall-facing deformation gradually evolved from predominantly local bulging in the middle portion to a combination of overall outward tilting and local bulging.

MaterialsVol. 19(22)
Xinjiang Agricultural University (CN)
National Key Research and Development Program of China
Geotechnical Engineering and Soil Stabilization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon