Thermodynamic modeling of chromium nitride precipitation in duplex stainless steels and weld metals

Duplex stainless steels (DSSs), containing roughly equal amounts of ferrite and austenite, offer an attractive combination of high strength and good corrosion resistance. The kinetics and factors controlling how fully ferritic material at temperatures near the solidus regains the desired 50/50 duplex microstructure around 1100 °C have previously been explored. The most important factor is nitrogen, present in the alloy, weld filler, and shielding gas. Other important factors are ferrite grain size and cooling rate, both influencing the time available for austenite formation at temperatures > 1000 °C, where kinetics remain favorable. Undesired intermetallic phases may form if the cooling rate is too slow, whereas rapid cooling rates and large ferrite grains promote chromium nitride precipitation. This study uses computational thermodynamics and the diffusion module DICTRA within Thermo-Calc to investigate how austenite formation influences nitride precipitation. The work focuses on the lean duplex grade LDX 2101, super duplex 2507, and 2509 weld metal filler. The simulations explore the influence of nitrogen content, grain size, and cooling rate on nitride precipitation. Furthermore, the commonly applied linear cooling rate in simulations is compared with non-linear conditions to evaluate their influence on nitride precipitation. Finally, the methodology developed in this work was applied to experimental data from a published study. Good agreement was obtained using the critical austenite spacing required for nitride precipitation as the comparison criterion. The simulations also reproduced the formation of nitride-free zones adjacent to austenite, indicating that high peak temperatures are required for these to form.

Authors

Institutions

Publication Details

Journal
Welding in the World
Published
2026-11-19
DOI
https://doi.org/10.1007/s40194-026-02710-w
Primary Topic
Microstructure and Mechanical Properties of Steels
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Thermodynamic modeling of chromium nitride precipitation in duplex stainless steels and weld metals

Elin M. Westin, Staffan Hertzman, Sten Wessman
2 links
Welding in the World
Microstructure and Mechanical Properties of Steels
article

Thermodynamic modeling of chromium nitride precipitation in duplex stainless steels and weld metals

Elin M. Westin, Staffan Hertzman, Sten Wessman
article en

Abstract

Duplex stainless steels (DSSs), containing roughly equal amounts of ferrite and austenite, offer an attractive combination of high strength and good corrosion resistance. The kinetics and factors controlling how fully ferritic material at temperatures near the solidus regains the desired 50/50 duplex microstructure around 1100 °C have previously been explored. The most important factor is nitrogen, present in the alloy, weld filler, and shielding gas. Other important factors are ferrite grain size and cooling rate, both influencing the time available for austenite formation at temperatures > 1000 °C, where kinetics remain favorable. Undesired intermetallic phases may form if the cooling rate is too slow, whereas rapid cooling rates and large ferrite grains promote chromium nitride precipitation. This study uses computational thermodynamics and the diffusion module DICTRA within Thermo-Calc to investigate how austenite formation influences nitride precipitation. The work focuses on the lean duplex grade LDX 2101, super duplex 2507, and 2509 weld metal filler. The simulations explore the influence of nitrogen content, grain size, and cooling rate on nitride precipitation. Furthermore, the commonly applied linear cooling rate in simulations is compared with non-linear conditions to evaluate their influence on nitride precipitation. Finally, the methodology developed in this work was applied to experimental data from a published study. Good agreement was obtained using the critical austenite spacing required for nitride precipitation as the comparison criterion. The simulations also reproduced the formation of nitride-free zones adjacent to austenite, indicating that high peak temperatures are required for these to form.

Welding in the World
University West (SE), Kista Photonics Research Center (SE)
Microstructure and Mechanical Properties of Steels
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon