Electrospun Biopolymer–Nanoparticle Hybrids With Amplified Piezoelectricity for Flexible Human–Machine Interfaces

ABSTRACT Flexible and wearable piezoelectric sensors are attracting increasing interest in motion monitoring and human–machine interface applications, as they enable self‐powered signal transduction from mechanical deformation into electrical output. In this work, electrospun poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) fibres incorporating zinc oxide (ZnO) nanoparticles (NPs) are developed as hybrid piezoelectric materials. The effects of electrospinning parameters and ZnO NP loading on fibre morphology, NP dispersion, structure, and piezoelectric performance are systematically investigated. Raman spectroscopy, XRD, FTIR, and XPS confirm the successful incorporation of crystalline wurtzite ZnO within a semi‐crystalline PHBV matrix, while preserving the main chemical structure of the polymer. Surface chemical analysis further indicates Zn–O contributions and changes in the oxygen‐containing ester/carbonyl environments of PHBV, supporting interfacial interactions between ZnO nanoparticles and the polymer matrix. Piezoelectric measurements show enhanced performance, with the piezoelectric coefficient, d 33 , increasing to 0.320 pC N −1 for PHBV/ZnO composites, corresponding to a 213.7% improvement compared with pristine PHBV fibres prepared under the same conditions. Vector network analyser measurements further reveal composition‐dependent values of the effective electromechanical coupling coefficient, k eff , ranging from 13.13% to 18.64%. The fibres are encapsulated in PDMS to fabricate flexible strain sensors, which demonstrate stable and repeatable voltage outputs under different bending angles, as well as reliable hand‐gesture recognition capability. These results highlight PHBV/ZnO composite fibres as an effective platform for flexible and self‐powered wearable sensing applications.

Authors

Institutions

Publication Details

Journal
SmartSys
Published
2026-11-15
DOI
https://doi.org/10.1002/sys3.70046
Primary Topic
Advanced Sensor and Energy Harvesting Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Electrospun Biopolymer–Nanoparticle Hybrids With Amplified Piezoelectricity for Flexible Human–Machine Interfaces

Oana Dobre, Carlos García Núñez, Jiaqi Zong, Mahdieh Shojaei Baghini
SmartSys
Advanced Sensor and Energy Harvesting Materials
article

Electrospun Biopolymer–Nanoparticle Hybrids With Amplified Piezoelectricity for Flexible Human–Machine Interfaces

Oana Dobre, Carlos García Núñez, Jiaqi Zong, Mahdieh Shojaei Baghini
article en

Abstract

ABSTRACT Flexible and wearable piezoelectric sensors are attracting increasing interest in motion monitoring and human–machine interface applications, as they enable self‐powered signal transduction from mechanical deformation into electrical output. In this work, electrospun poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) fibres incorporating zinc oxide (ZnO) nanoparticles (NPs) are developed as hybrid piezoelectric materials. The effects of electrospinning parameters and ZnO NP loading on fibre morphology, NP dispersion, structure, and piezoelectric performance are systematically investigated. Raman spectroscopy, XRD, FTIR, and XPS confirm the successful incorporation of crystalline wurtzite ZnO within a semi‐crystalline PHBV matrix, while preserving the main chemical structure of the polymer. Surface chemical analysis further indicates Zn–O contributions and changes in the oxygen‐containing ester/carbonyl environments of PHBV, supporting interfacial interactions between ZnO nanoparticles and the polymer matrix. Piezoelectric measurements show enhanced performance, with the piezoelectric coefficient, d 33 , increasing to 0.320 pC N −1 for PHBV/ZnO composites, corresponding to a 213.7% improvement compared with pristine PHBV fibres prepared under the same conditions. Vector network analyser measurements further reveal composition‐dependent values of the effective electromechanical coupling coefficient, k eff , ranging from 13.13% to 18.64%. The fibres are encapsulated in PDMS to fabricate flexible strain sensors, which demonstrate stable and repeatable voltage outputs under different bending angles, as well as reliable hand‐gesture recognition capability. These results highlight PHBV/ZnO composite fibres as an effective platform for flexible and self‐powered wearable sensing applications.

SmartSysVol. 2(4)
University of Glasgow (GB)
Advanced Sensor and Energy Harvesting Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Electrospun Biopolymer–Nanoparticle Hybrids With Amplified Piezoelectricity for Flexible Human–Machine Interfaces — Oana Dobre, Carlos García Núñez, et al. · SmartSys (2026) | TGRS Research Map | TGRS