Investigation of the Structural and Technological Configuration and Design Parameters of a Heavy Disc Harrow for Soil Tillage
This study evaluated the agrotechnical, energy, and operational performance of a 7.0 m heavy disc harrow (two rows, eight sections, 72 notched discs of 660 mm diameter) designed for traction class 5–6 tractors. Field tests on perennial grass sod used a Kirovets K-735 tractor at angles of attack of 12°, 15°, and 18° and speeds of 9.0–11.5 km h−1. Mean tillage depth was 7.0–9.6 cm, the share of soil particles smaller than 50 mm was 80.1–94.5%, and crop residue incorporation was 60.0–92.7%. Draft resistance (44.1–53.9 kN) remained below the 65 kN limit, and specific energy consumption was 62.6–76.8 MJ ha−1. At the common speed of 10.8 km h−1, the angle of attack significantly affected tillage depth, draft resistance, residue cutting, and residue incorporation (p < 0.001), but not soil fragmentation or surface roughness. Because speed was not set independently of the angle, the nine single-pass modes form a multi-condition comparison rather than a single-factor experiment. The measured draft was 1.83–2.26 times the value predicted by ASABE D497.7. Complete residue cutting occurred at 18° and, at 15°, only at 11.3 km h−1; at 12°, depth remained below the required 8–12 cm. The results support selecting operating settings under comparable conditions in Northern Kazakhstan.
Authors
- Alexey Ivanovich Derepaskin (ORCID: https://orcid.org/0000-0003-4553-5474)
- Лаптев Николай Владимирович (ORCID: https://orcid.org/0000-0002-4953-0016)
- Руслан Кравченко
- Artem Komarov (ORCID: https://orcid.org/0000-0002-8260-0311)
- Yurij Vladimirovich Poliсhshuk
- Yurij Viktorovich Binyukov
Publication Details
- Journal
- AgriEngineering
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/agriengineering8110495
- Primary Topic
- Soil Mechanics and Vehicle Dynamics
- Type
- article
- Field-Weighted Citation Impact
- 0.00