Experimental and simulation study on mechanical properties of steel fiber coal gangue concrete

Abstract Coal gangue aggregate has high water absorption and a porous microstructure, both of which can reduce the mechanical performance of coal gangue concrete (CGC). This study examined whether hooked steel fibers can compensate for this strength loss and improve the mechanical behavior of steel fiber-reinforced coal gangue concrete (STCGC). Seven mixtures were prepared by varying the coal gangue replacement ratio (0%, 25%, 50%, and 75%) and, at 50% replacement, the steel fiber content (0%, 0.5%, 1.0%, and 1.5%). In total, 210 specimens were tested at 7 d, 14 d, and 28 d by cube compression, splitting tensile, axial compression, and elastic modulus tests. Scanning electron microscopy and ABAQUS mesoscopic simulation were used to interpret the failure mechanism and verify the compressive response. The results show that increasing coal gangue replacement reduces strength because of the porous and weak aggregate structure, whereas steel fibers improve crack resistance and post-cracking integrity. Compared with the 50% CGC mixture, steel fiber addition increased the average cube compressive strength, splitting tensile strength, axial compressive strength, and measured elastic modulus by 2.26%, 24.61%, 23.26%, and 59.47% (a mixture-specific result under the present test conditions; see Results for interpretation), respectively. Under the specific baseline of 50% coal gangue replacement, the 1.0% steel fiber mixture achieved the most balanced mechanical performance among the tested series Strength-conversion equations and stress-strain constitutive relationships were fitted for the tested mixtures. The simulated cube compressive strengths followed the experimental trend, indicating that the mesoscopic model can reproduce the compressive failure pattern of STCGC within the scope of the present mixtures. This study provides a test-calibrated basis for using steel fibers to improve the mechanical performance of coal gangue aggregate concrete.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-09-19
DOI
https://doi.org/10.1038/s41598-026-71818-2
Primary Topic
Innovative concrete reinforcement materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
article

Experimental and simulation study on mechanical properties of steel fiber coal gangue concrete

Zhengyan Zhao, Guangyuan Weng, Junbin Chen, Yanjun He et al.
Scientific Reports
Innovative concrete reinforcement materials
article

Experimental and simulation study on mechanical properties of steel fiber coal gangue concrete

Zhengyan Zhao, Guangyuan Weng, Junbin Chen, Yanjun He, Yang Liu, Luming Zhu, Xingang Wang, Xiyu Zhu
article en

Abstract

Abstract Coal gangue aggregate has high water absorption and a porous microstructure, both of which can reduce the mechanical performance of coal gangue concrete (CGC). This study examined whether hooked steel fibers can compensate for this strength loss and improve the mechanical behavior of steel fiber-reinforced coal gangue concrete (STCGC). Seven mixtures were prepared by varying the coal gangue replacement ratio (0%, 25%, 50%, and 75%) and, at 50% replacement, the steel fiber content (0%, 0.5%, 1.0%, and 1.5%). In total, 210 specimens were tested at 7 d, 14 d, and 28 d by cube compression, splitting tensile, axial compression, and elastic modulus tests. Scanning electron microscopy and ABAQUS mesoscopic simulation were used to interpret the failure mechanism and verify the compressive response. The results show that increasing coal gangue replacement reduces strength because of the porous and weak aggregate structure, whereas steel fibers improve crack resistance and post-cracking integrity. Compared with the 50% CGC mixture, steel fiber addition increased the average cube compressive strength, splitting tensile strength, axial compressive strength, and measured elastic modulus by 2.26%, 24.61%, 23.26%, and 59.47% (a mixture-specific result under the present test conditions; see Results for interpretation), respectively. Under the specific baseline of 50% coal gangue replacement, the 1.0% steel fiber mixture achieved the most balanced mechanical performance among the tested series Strength-conversion equations and stress-strain constitutive relationships were fitted for the tested mixtures. The simulated cube compressive strengths followed the experimental trend, indicating that the mesoscopic model can reproduce the compressive failure pattern of STCGC within the scope of the present mixtures. This study provides a test-calibrated basis for using steel fibers to improve the mechanical performance of coal gangue aggregate concrete.

Scientific Reports
Xi'an Shiyou University (CN), Xi'an Polytechnic University (CN), Oil and Gas Center (CN), Shaanxi Yanchang Petroleum (China) (CN), China National Petroleum Corporation (China) (CN)
Openalex Percentile: Top 16%
Innovative concrete reinforcement materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.