Spatial characteristic of temperature distribution and material flow behaviors during bobbin tool friction stir welding: a computational fluid dynamics study
The incorporation of dual shoulders endows bobbin tool friction stir welding (BT-FSW) with spatially distinct heat transfer and material flow characteristics relative to conventional FSW. The vague understanding of these processes hinders efficient optimization of BT-FSW. To address this gap, a computational fluid dynamics (CFD) model, which considered the fully coupling of thermo-mechanical-fluid, was established. Three contact pressure models, namely the Front-Peaked Contact Pressure Model (FP-CPM), Uniform Contact Pressure Model (U-CPM), and Rear-Peaked Contact Pressure Model (RP-CPM), were proposed to model the pressure distribution at the tool-workpiece (T/W) interface. The results show that the distribution of contact pressure at the T/W interface constitutes a critical factor governing the temperature field and flow behavior during welding stage. The FP-CPM provided superior predictive accuracy for the welding temperature, the shape of plastic deformation zone, and material flow trajectories, compared to U-CPM and RP-CPM. Agreed by both experiment and prediction, the temperature on the retreating side (RS) exceeded that on the advancing side (AS). Revealed by FP-CPM model, this phenomenon is attributable to the deflection of high-temperature material from the AS toward the RS, driven by the intense material flow ahead of the tool induced by the high-pressure zone. At the T/W interface, the material exhibited asymmetric horizontal flow with a thin layer ahead of the tool and a broader low-speed region behind the tool. Concurrently, vertical migration featured circumferential flow around the tool converging toward the plate mid-thickness.
Authors
- Gaoqiang Chen (ORCID: https://orcid.org/0000-0001-6029-650X)
- Qingyu Shi (ORCID: https://orcid.org/0009-0004-8225-0958)
- Chengle Yang (ORCID: https://orcid.org/0000-0001-5391-316X)
- Xu Yan
- Honghua Han
- Yanhua Zhao
- Suhong Zhang
- Yunfei HAO
Institutions
- Beijing Vocational College of Labour and Social Security (CN)
- Tsinghua University (CN)
Publication Details
- Journal
- International Journal of Material Forming
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1007/s12289-026-02109-4
- Primary Topic
- Advanced Welding Techniques Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China