Layer-specific effects of an ultra-speed sintering protocol on translucency and microstructure of yttria-gradient zirconia

This study evaluated the effects of an experimental ultra-speed (US) sintering protocol on the translucency and microstructure of yttria-gradient zirconia. Eighty specimens were prepared from two laboratory yttria-gradient zirconias (5 mol% yttria-stabilized incisal and 4 mol% yttria-stabilized cervical layers). Each layer underwent conventional (CS) or experimental US sintering. Translucency ( TP 00 ) was measured spectrophotometrically ( n = 10/group). Microstructure, grain size, and phase composition were analyzed using field-emission scanning electron microscopy ( n = 4/group) and Rietveld refinement ( n = 2/group). Translucency was analyzed using three-way ANOVA, and grain size using a generalized linear model (α = 0.05). Under CS, the incisal layer ( TP 00 : 8.01–8.12) was more translucent than the cervical layer (7.27–7.45), whereas this relationship was reversed after US, with the incisal layer ( TP 00 : 5.12–5.23) being less translucent than the cervical layer (7.52–7.79). This reversal reflected a significant reduction in TP 00 in the incisal layer (Δ TP 00 : 2.78–3.00), exceeding the translucency acceptability threshold for Δ TP 00 , while cervical changes remained within the translucency perceptibility threshold for Δ TP 00 . Residual pores were more evident in the incisal layer after US sintering, with grain size increasing from 1.11 to 1.13 to 2.95–2.97 μm. After US sintering, the yttria-rich t’ -phase fraction was higher, whereas the t -phase fraction was lower under US than under CS in both layers. These findings provide further insight into the potential layer-specific response of yttria-gradient zirconias to US sintering protocol.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-13
DOI
https://doi.org/10.1038/s41598-026-76604-8
Primary Topic
Dental materials and restorations
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Layer-specific effects of an ultra-speed sintering protocol on translucency and microstructure of yttria-gradient zirconia

Hyo‐Joung Seol, Mi-Hyang Cho, Hye-Jeong Shin
5 links
Scientific Reports
Dental materials and restorations
article

Layer-specific effects of an ultra-speed sintering protocol on translucency and microstructure of yttria-gradient zirconia

Hyo‐Joung Seol, Mi-Hyang Cho, Hye-Jeong Shin
article en

Abstract

This study evaluated the effects of an experimental ultra-speed (US) sintering protocol on the translucency and microstructure of yttria-gradient zirconia. Eighty specimens were prepared from two laboratory yttria-gradient zirconias (5 mol% yttria-stabilized incisal and 4 mol% yttria-stabilized cervical layers). Each layer underwent conventional (CS) or experimental US sintering. Translucency ( TP 00 ) was measured spectrophotometrically ( n = 10/group). Microstructure, grain size, and phase composition were analyzed using field-emission scanning electron microscopy ( n = 4/group) and Rietveld refinement ( n = 2/group). Translucency was analyzed using three-way ANOVA, and grain size using a generalized linear model (α = 0.05). Under CS, the incisal layer ( TP 00 : 8.01–8.12) was more translucent than the cervical layer (7.27–7.45), whereas this relationship was reversed after US, with the incisal layer ( TP 00 : 5.12–5.23) being less translucent than the cervical layer (7.52–7.79). This reversal reflected a significant reduction in TP 00 in the incisal layer (Δ TP 00 : 2.78–3.00), exceeding the translucency acceptability threshold for Δ TP 00 , while cervical changes remained within the translucency perceptibility threshold for Δ TP 00 . Residual pores were more evident in the incisal layer after US sintering, with grain size increasing from 1.11 to 1.13 to 2.95–2.97 μm. After US sintering, the yttria-rich t’ -phase fraction was higher, whereas the t -phase fraction was lower under US than under CS in both layers. These findings provide further insight into the potential layer-specific response of yttria-gradient zirconias to US sintering protocol.

Scientific Reports
Pusan National University (KR), Wonkwang University (KR)
National Research Foundation of Korea, Ministry of Science and ICT, South Korea
Dental materials and restorations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon