Cell teardown and post mortem degradation analysis of commercial 18650 sodium-ion batteries

Commercial sodium-ion batteries (SIBs) are entering the market, increasing the need to understand how cell design and chemistry influence degradation. This single sample case study combines teardown, electrochemical testing and post mortem analyses of three commercial 18650 cells: NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM)||hard carbon (HC) cells NFM-1200 and NFM-1500, and a Na 3 V 2 (PO 4 ) 2 F 3 (NVPF)||HC cell (NVPF-700), named according to manufacturer-specified nominal capacities (mAh). Among the investigated cells, NFM-1500 had the highest cathode loading, areal capacity and cell-level energy density. During long-term cycling, NFM-1500 reached 80% of its initial discharge capacity after approximately 500 cycles, whereas NFM-1200 underwent greater relative capacity loss over extended cycling. NVPF-700 retained approximately 600 mAh after 3000 cycles (97% of its initial 1C discharge capacity, approximately 620 mAh). For the individual cells investigated, higher rate capability was observed for the NFM-based cells compared to NVPF-700. Post mortem analyses revealed pronounced electrolyte decomposition and Ni/Mn/Fe deposition on HC in NFM-1500. In NVPF-700, a mixed NaPF 6 /NaFSI electrolyte with additives (succinonitrile, VC, FEC, BF 4 − and DFP) and V deposition on HC were identified. Different degradation rankings under long-term cycling and C-Rate testing revealed that observed aging depends on active material chemistry, electrode loading, morphology, electrolyte formulation and cycling protocol, with cell-to-cell variability remaining a potential factor.

Authors

Institutions

Publication Details

Journal
Journal of Power Sources
Published
2026-11-16
DOI
https://doi.org/10.1016/j.jpowsour.2026.241952
Primary Topic
Advancements in Battery Materials
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Cell teardown and post mortem degradation analysis of commercial 18650 sodium-ion batteries

Martin Winter, Simon Wiemers‐Meyer, Maike Michelle Gnutzmann, Leon Katzenmeier et al.
4 links
Journal of Power Sources
Advancements in Battery Materials
article

Cell teardown and post mortem degradation analysis of commercial 18650 sodium-ion batteries

Martin Winter, Simon Wiemers‐Meyer, Maike Michelle Gnutzmann, Leon Katzenmeier, Jakob Michael Hesper, Simon Franz Lux, Julius Buchmann, Sascha Nowak, Nick Fehlings, Fabian Hoheisel, Philipp Voss, Lukas Ihlbrock, Dennis Kessen, Aleandros Tsoufios
article en

Abstract

Commercial sodium-ion batteries (SIBs) are entering the market, increasing the need to understand how cell design and chemistry influence degradation. This single sample case study combines teardown, electrochemical testing and post mortem analyses of three commercial 18650 cells: NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM)||hard carbon (HC) cells NFM-1200 and NFM-1500, and a Na 3 V 2 (PO 4 ) 2 F 3 (NVPF)||HC cell (NVPF-700), named according to manufacturer-specified nominal capacities (mAh). Among the investigated cells, NFM-1500 had the highest cathode loading, areal capacity and cell-level energy density. During long-term cycling, NFM-1500 reached 80% of its initial discharge capacity after approximately 500 cycles, whereas NFM-1200 underwent greater relative capacity loss over extended cycling. NVPF-700 retained approximately 600 mAh after 3000 cycles (97% of its initial 1C discharge capacity, approximately 620 mAh). For the individual cells investigated, higher rate capability was observed for the NFM-based cells compared to NVPF-700. Post mortem analyses revealed pronounced electrolyte decomposition and Ni/Mn/Fe deposition on HC in NFM-1500. In NVPF-700, a mixed NaPF 6 /NaFSI electrolyte with additives (succinonitrile, VC, FEC, BF 4 − and DFP) and V deposition on HC were identified. Different degradation rankings under long-term cycling and C-Rate testing revealed that observed aging depends on active material chemistry, electrode loading, morphology, electrolyte formulation and cycling protocol, with cell-to-cell variability remaining a potential factor.

Journal of Power SourcesVol. 700
Forschungszentrum Jülich (DE), University of Münster (DE), Helmholtz-Institute Münster (DE), Fraunhofer Research Institution for Battery Cell Production (DE), RWTH Aachen University (DE)
Ministerium für Kultur und Wissenschaft des Landes Nordrhein-Westfalen
Affordable and clean energy
Advancements in Battery Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon