Influence of the Epitaxial Growth Conditions of the Active Region on the Performance of Far‐Ultraviolet‐C Light‐Emitting Diodes

Far‐ultraviolet‐C (far‐UVC) light‐emitting diodes (LEDs) emitting at emission wavelengths of 226 or 233 nm with active regions epitaxially grown under different conditions are compared regarding their emission power, operation voltage, and lifetime. A variation in the V/III ratio at the same growth rate was found to have no impact on the LED performance. However, a decrease in growth temperature from 1060 to 1020 °C increases the emission power by around 40%. Furthermore, a decrease in growth rate from 0.080 to 0.014 nm/s increases the emission power by about 50%. At the same time, the L70 lifetime increases by a factor of 3.4. A reduction of the Si doping concentration in the inner quantum well barriers from 4 × 10 18 to 2 × 10 18 cm −3 increases the emission power by more than 40% without affecting the lifetime of the far‐UVC LEDs. Finally, based on these optimizations, 226 nm LEDs with an L70 lifetime above 250 h and an initial emission power of more than 0.4 mW were realized.

Authors

Institutions

Publication Details

Journal
physica status solidi (a)
Published
2026-08-27
DOI
https://doi.org/10.1002/pssa.70503
Primary Topic
GaN-based semiconductor devices and materials
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Influence of the Epitaxial Growth Conditions of the Active Region on the Performance of Far‐Ultraviolet‐C Light‐Emitting Diodes

Jan Ruschel, Tim Kolbe, M. Weyers, S. Einfeldt et al.
physica status solidi (a)
GaN-based semiconductor devices and materials
article

Influence of the Epitaxial Growth Conditions of the Active Region on the Performance of Far‐Ultraviolet‐C Light‐Emitting Diodes

Jan Ruschel, Tim Kolbe, M. Weyers, S. Einfeldt, Hyun Kyong Cho, Sylvia Hagedorn, Jens Rass
article en

Abstract

Far‐ultraviolet‐C (far‐UVC) light‐emitting diodes (LEDs) emitting at emission wavelengths of 226 or 233 nm with active regions epitaxially grown under different conditions are compared regarding their emission power, operation voltage, and lifetime. A variation in the V/III ratio at the same growth rate was found to have no impact on the LED performance. However, a decrease in growth temperature from 1060 to 1020 °C increases the emission power by around 40%. Furthermore, a decrease in growth rate from 0.080 to 0.014 nm/s increases the emission power by about 50%. At the same time, the L70 lifetime increases by a factor of 3.4. A reduction of the Si doping concentration in the inner quantum well barriers from 4 × 10 18 to 2 × 10 18 cm −3 increases the emission power by more than 40% without affecting the lifetime of the far‐UVC LEDs. Finally, based on these optimizations, 226 nm LEDs with an L70 lifetime above 250 h and an initial emission power of more than 0.4 mW were realized.

physica status solidi (a)Vol. 223(17)
Ferdinand-Braun-Institut (DE)
European Commission
Affordable and clean energy
Openalex Percentile: Top 15%
GaN-based semiconductor devices and materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Influence of the Epitaxial Growth Conditions of the Active Region on the Performance of Far‐Ultraviolet‐C Light‐Emitting Diodes — Jan Ruschel, Tim Kolbe, et al. · physica status solidi (a) (2026) | TGRS Research Map | TGRS