Dimensional accuracy of mock-ups fabricated using conventional, additive, and subtractive manufacturing techniques: an in vitro study

Mock-ups preview esthetic and functional outcomes and may guide minimally invasive tooth preparation. This in vitro study compared conventionally, additively, and subtractively fabricated six-unit anterior mock-ups with patient-specific digital designs. Ten patient-specific designs were each used to fabricate one six-unit mock-up by conventional impression (CM), additive manufacturing (AM), and subtractive manufacturing (SM), yielding 30 specimens. Surface matching was defined as the percentage of the evaluated labial surface within ± 0.10 mm of the reference following local best-fit registration using the same labial surfaces. Absolute digital and caliper-based linear deviations and signed labial depth deviations by tooth type, inciso-cervical level, and mesio-distal position were assessed. Patients served as matched experimental units. Exact Friedman tests and paired exact Wilcoxon signed-rank tests with Holm adjustment were used; regional analyses were exploratory. Under the applied labial best-fit registration, surface matching was 74.54 ± 12.26% for SM, 58.72 ± 18.84% for AM, and 42.80 ± 12.46% for CM (exact P = 0.002). SM exceeded CM (Holm-adjusted P = 0.006); other pairwise differences were not significant. Absolute digital and caliper-based linear deviations did not differ significantly among workflows. Patient-level signed depth deviations were 0.022 ± 0.022 mm for SM, 0.015 ± 0.029 mm for AM, and − 0.002 ± 0.033 mm for CM (exact P = 0.030); SM differed from CM (Holm-adjusted P = 0.012). When averaged across manufacturing workflows, mean signed depth deviations differed by tooth type; however, workflow-specific patterns were not uniform, with consistently positive canine deviations and variations in central- and lateral-incisor deviations among workflows. Mesio-distal positions did not differ significantly. Under the present labial best-fit registration conditions, SM showed a higher observed surface-matching percentage than CM, while AM was numerically intermediate without significant differences from either workflow. This finding reflects agreement under the applied registration conditions and does not provide independent evidence of superior trueness for SM. No statistically significant differences in absolute linear deviations were detected among workflows. Although overall signed depth deviations were small, SM and CM differed. Mean signed depth deviations differed by tooth type when averaged across manufacturing workflows; however, workflow-specific patterns were not uniform.

Authors

Institutions

Publication Details

Journal
BMC Oral Health
Published
2026-11-16
DOI
https://doi.org/10.1186/s12903-026-10475-3
Primary Topic
Dental materials and restorations
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Dimensional accuracy of mock-ups fabricated using conventional, additive, and subtractive manufacturing techniques: an in vitro study

Ayşegül KURT, Onur Doğan Dağ, Özgül Alver
4 links
BMC Oral Health
Dental materials and restorations
article

Dimensional accuracy of mock-ups fabricated using conventional, additive, and subtractive manufacturing techniques: an in vitro study

Ayşegül KURT, Onur Doğan Dağ, Özgül Alver
article en

Abstract

Mock-ups preview esthetic and functional outcomes and may guide minimally invasive tooth preparation. This in vitro study compared conventionally, additively, and subtractively fabricated six-unit anterior mock-ups with patient-specific digital designs. Ten patient-specific designs were each used to fabricate one six-unit mock-up by conventional impression (CM), additive manufacturing (AM), and subtractive manufacturing (SM), yielding 30 specimens. Surface matching was defined as the percentage of the evaluated labial surface within ± 0.10 mm of the reference following local best-fit registration using the same labial surfaces. Absolute digital and caliper-based linear deviations and signed labial depth deviations by tooth type, inciso-cervical level, and mesio-distal position were assessed. Patients served as matched experimental units. Exact Friedman tests and paired exact Wilcoxon signed-rank tests with Holm adjustment were used; regional analyses were exploratory. Under the applied labial best-fit registration, surface matching was 74.54 ± 12.26% for SM, 58.72 ± 18.84% for AM, and 42.80 ± 12.46% for CM (exact P = 0.002). SM exceeded CM (Holm-adjusted P = 0.006); other pairwise differences were not significant. Absolute digital and caliper-based linear deviations did not differ significantly among workflows. Patient-level signed depth deviations were 0.022 ± 0.022 mm for SM, 0.015 ± 0.029 mm for AM, and − 0.002 ± 0.033 mm for CM (exact P = 0.030); SM differed from CM (Holm-adjusted P = 0.012). When averaged across manufacturing workflows, mean signed depth deviations differed by tooth type; however, workflow-specific patterns were not uniform, with consistently positive canine deviations and variations in central- and lateral-incisor deviations among workflows. Mesio-distal positions did not differ significantly. Under the present labial best-fit registration conditions, SM showed a higher observed surface-matching percentage than CM, while AM was numerically intermediate without significant differences from either workflow. This finding reflects agreement under the applied registration conditions and does not provide independent evidence of superior trueness for SM. No statistically significant differences in absolute linear deviations were detected among workflows. Although overall signed depth deviations were small, SM and CM differed. Mean signed depth deviations differed by tooth type when averaged across manufacturing workflows; however, workflow-specific patterns were not uniform.

BMC Oral Health
Trakya University (TR)
Trakya Üniversitesi
Dental materials and restorations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon