Influence of Geometric Parameters on Hybrid Darrieus–Savonius Hydrokinetic Turbine Performance: A CFD and Experimental Study

Reliable electricity supply in Colombia’s Non-Interconnected Zones requires sustainable and low-cost energy technologies. Vertical-axis hydrokinetic turbines are promising for this purpose; however, their relatively low power coefficient remains a major challenge. This study combines transient 2D and 3D k–ω SST computational fluid dynamics (CFD) simulations with hydraulic channel experiments to investigate a hybrid Darrieus–Savonius turbine. A 27-case Design of Experiments (DoE) based on 2D CFD was first applied to screen the effects of rotor radius ratio (RR), attachment angle (AA), and water velocity. Within the investigated design space, the configuration with RR=0.5 and AA=0∘ produced the most favorable average performance. The selected configuration was subsequently analyzed using 3D CFD and experimentally evaluated at TSR values of 1.0, 1.1, and 1.2. At TSR = 1.0, the 3D model predicted CP=0.1525, closely matching the experimental value of 0.1541 with a relative error of 1.05%. The results demonstrate that 2D CFD is useful for computationally efficient parameter screening and qualitative trend identification, but it overpredicts absolute performance because it neglects blade tip vortices, spanwise flow, and volumetric wake interactions. Three-dimensional CFD is therefore required for reliable performance prediction and analysis of the complex flow structures governing hybrid hydrokinetic turbine behavior.