Study on Rock Mechanics Response Characteristics of Through-Going Structures with Different Dip Angles

Through-going structures are widely distributed in rock masses of underground engineering, and their dip angles act as the core factor affecting the stress field and mechanical response of surrounding rock. To reveal the mechanical mechanism of rock masses containing through-going structures with different dip angles, this study adopts a combined method of theoretical derivation, indoor model testing and numerical simulation. Firstly, a plane strain mechanical model is established to classify Tectonically-induced Stress, Residual Gravitational Stress and engineering-induced stress, and the theoretical formulas for stress components, stress residual coefficient and stress deflection angle are derived. Secondly, rock-like specimens with through-going structures of various dip angles are prepared and biaxial compression tests are carried out to monitor mechanical parameters such as surrounding rock strain and peak strength. Finally, a large-scale numerical model is built by FLAC2D (version 7.0) software to simulate the whole process of stress equilibrium and excavation unloading of rock mass under a normal stress of 20 MPa. Then the data of principal stress, stress components, stress residual coefficient and deflection angle under different dip angles are extracted. The results show that the dip angle of through-going structure exerts a prominent regulatory effect on the rock mass stress field. With the increase of the dip angle, the Tectonically-induced Stress decreases continuously while the Residual Gravitational Stress rises gradually. The variation trend of stress deflection angle is highly consistent with structural dip angle, and the influence of Residual Gravitational Stress on deflection angle is limited. Due to the differences in loading modes and model sizes between indoor tests and numerical simulations, the evolution laws of stress residual coefficient show opposite trends, but both results verify the dominant effect of structural dip angle. Combined with theoretical, experimental and numerical results, the proposed theoretical system can effectively describe the stress evolution law of rock masses with through-going structures, which provides theoretical reference and technical support for the stability analysis of surrounding rock in similar underground engineering.