A wood-based substrate for passive humidity buffering and visual humidity indication in museum display cases
Eco-friendly wood-based substrates that combine passive humidity buffering with visual humidity indication remain limited for museum display cases. Poplar wood was modified by low-temperature ultrasonic co-impregnation with glycerol and anthocyanin. Substrate screening, single-factor experiments and orthogonal experiments were used to optimise additive dosage and impregnation time. Scanning electron microscopy (SEM) and Fourier transform infra-red spectroscopy (FTIR) indicated that modification was governed mainly by pore filling and intermolecular hydrogen bonding. The optimal process used 22 w/w% glycerol, 0.6 w/w% anthocyanin and 9 h impregnation, yielding a 51% higher 24 h moisture uptake than untreated poplar, with effective pore filling and uniform pigment dispersion. The colour response remained detectable after 30 wet–dry cycles. This work provides an environmentally compatible wood-based substrate for supplementary passive humidity buffering and close-range visual humidity indication in museum display cases.
Authors
- Ting He
- Lin Shi (ORCID: https://orcid.org/0009-0005-9247-1030)
- Guangyao Cui
- Li Zeng
Institutions
- Central South University of Forestry and Technology (CN)
- Palace Museum (CN)
Publication Details
- Journal
- npj Heritage Science
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1038/s40494-026-03116-z
- Primary Topic
- Wood Treatment and Properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Northwestern Polytechnical University
- Beijing Forestry University
- Central South University of Forestry and Technology