Influence of T-Stub Stiffness Configuration on the Cyclic Performance and Damage Evolution of Blind-Bolted Beam-to-Square Hollow Section Column Connections

Four full-scale exterior beam-to-column connections comprising H-section beams and square hollow-section (SHS) columns were tested under low-cycle reversed loading to investigate two engineering-oriented T-stub section configurations and the effects of the presence or absence of triangular stiffeners. Failure modes, moment–rotation response, stiffness degradation, energy dissipation, and cumulative damage were evaluated, together with nonlinear finite element simulations and a modified Park–Ang damage assessment. All specimens progressed from bolt-hole slip through plastic deformation to localized fracture. In the unstiffened connections, damage concentrated near the T-stub flange-to-web junction; stiffeners redistributed critical demand toward the stiffener welds, adjacent T-stub webs, and SHS column walls. The maximum differences in initial rotational stiffness relative to J1A were 15.69% and 15.07% in the positive and negative loading directions, indicating that the elastic-stage response reflected the combined deformability of the T-stub, blind-bolt assembly, and column wall. The maximum increases in yield moment, peak-resistance moment, and ductility coefficient were 20.59%, 43.71%, and 45.91%, respectively. Complete-history energy dissipation varied non-monotonically across the tested configurations. The finite element model reproduced the global and local responses, while the damage-index results showed overall correspondence with the observed failure progression. The findings emphasize stiffness compatibility and rational distribution of plastic demand rather than maximum local stiffness.