Longmaxi–Wufeng Shales in Northeastern Yunnan, China: Engineering Geological Facies Differentiation and Implications for Fracturing

To clarify how shale-reservoir heterogeneity constrains hydraulic-fracturing effectiveness in complex structural areas, this study analyzes exploration well X in the Mugan–Shoushan area, Yunnan Province, using organic geochemistry, petrology and mineralogy, reservoir-property, and rock-mechanical data from the Wufeng–Longmaxi formations. The results show pronounced vertical engineering-geological differentiation. Average clay content decreases from 42% to 8%, Average carbonate minerals increase from 16% to 50%, and quartz is anomalously enriched in the Longyi 1-1 layer of the Longmaxi Formation (Longyi 1-1; 76%). The Longyi 1-3 layer of the Longmaxi Formation has the highest porosity (9.37%) but low matrix permeability (0.013–0.019 mD); the Longyi 1-2 layer of the Longmaxi Formation is highly brittle and tight; and the Longyi 1-4 layer of the Longmaxi Formation is highly ductile and water-rich. Accordingly, four engineering geological facies are defined: Type I, organic-rich, moderately brittle, and moderately ductile composite facies; Type II, organic-rich, highly brittle, tight, and strongly stress-sensitive facies; Type III, organic-poor, highly ductile, water-rich, and strongly water-sensitive facies; and Type IV, highly brittle, fracture-developed, and high-adsorption facies. Implications for fracturing are proposed for each facies, including mixed-fluid network stimulation, acid pretreatment with controlled flowback, interval avoidance, and coordinated stimulation with adjacent main reservoirs.