Model-Based Optimization and Evaluation of Hybrid Powertrains for Commercial Heavy-Duty Class 8 Truck Applications

<div>In an ever-evolving landscape of emission regulations, charging infrastructure, customer demands, fuel/energy costs and decarbonization goals, heavy-duty on-road vehicle manufacturers continue to evaluate alternative powertrain technologies. While most heavy-duty vehicle manufacturers now have battery electric vehicles (BEVs) in their portfolio, significant challenges of charging infrastructure, range anxiety, payload capacity reduction and upfront costs have contributed to their lower adoption rates. Plug-in hybrid electric vehicles (PHEVs) have significant potential of leveraging upcoming BEV infrastructure and component supply chains to reduce operating costs while still maintaining longer range and payload capacity benefits of conventional ICE powertrains.</div> <div>This article applies a model-based approach to evaluate multiple Class 7–8 heavy-duty powertrain configurations. A system-level (1D) model of the conventional diesel ICE-based truck was developed in GT-Suite and validated against on-road test data. Using the diesel ICE model as a baseline, system-level models for different hybrid configurations were adapted, and their powertrain architecture was optimized at the system level. Additionally, an equivalent consumption minimization strategy (ECMS) for energy management was also optimized for each of the hybrid powertrain configurations to maximize fuel efficiency and emission benefits. All the hybrid configurations were then compared against the conventional diesel ICE Class 8 truck in terms of performance (acceleration, top speed, gradeability and startability), fuel economy (real-world cycles and certification cycles), emissions, and range for long-haul applications. Unique to this approach is the simultaneous co-optimization of powertrain component sizing and supervisory control logic by utilizing a Genetic Algorithm–based optimization approach. Results indicate that all parallel hybrid architectures (P2, P2–P3, and P4) achieve performance (acceleration, top speed, gradeability, and startability) parity or improvement compared to baseline diesel architecture. P2-based architectures demonstrated a 12–14% improvement in fuel economy on representative real-world cycles when operating in a blended charge-depleting–charge-sustaining mode of operation, and a 4–6% improvement in fuel economy when operating in charge-sustaining mode alone. By quantifying these results across diverse topologies, this work addresses a significant research gap in the holistic evaluation of Class 8 hybrids, specifically, the trade-off between multi-speed electric drives, system-level mass increases, and real-world fuel economy, that remains underexplored in current literature.</div>