Temperature-Invariant High-Resolution Imaging for Automotive Cameras Using Collaborative Passive Compensation

Thermal-induced degradation of modulation transfer function (MTF) and image sharpness in automotive camera modules under large real-world temperature variations is a key bottleneck for the safe deployment of level 3 and higher advanced driver assistance systems. To address this challenge, a collaborative passive compensation framework is proposed to maintain high-resolution imaging performance across extreme temperature conditions. Within this framework, an elastic spacer is embedded into the lens stack as an additional optical design degree of freedom. This carefully engineered element expands the thermal focus compensation capability of the lens assembly and suppresses inherent back focal plane (BFP) drift within a narrow range through coordinated opto-mechanical coupling optimal design. Then, a metal stiffener plate is introduced to tailor the thermo-mechanical deformation behavior of the detector-mounted printed circuit board. By optimizing the thickness of the stiffener plate, the residual thermally induced BFP drift of the overall opto-mechanical system is effectively counteracted, enabling global opto-mechanical–thermal equilibrium. Experimental results from the prototype camera module demonstrate that, over an ultra-wide temperature range from −40 °C to +95 °C, the maximum absolute BFP mismatch between the lens optical focus plane and the image sensor plane is constrained within 1m, achieving ∼90% reduction compared with conventional optical-only athermalization approaches. At a spatial frequency of 119 lp/mm, the MTF at the center and the left/right 0.7-field positions consistently exceeds the design threshold of 0.5 with negligible degradation throughout the full temperature range. These results demonstrate that the proposed approach enables a fully passive, temperature-invariant automotive camera module, achieving an optimal balance among compactness, cost efficiency, and robustness under harsh automotive operating conditions.

Authors

Institutions

Publication Details

Journal
Sensors
Published
2026-11-19
DOI
https://doi.org/10.3390/s26227321
Primary Topic
Advanced optical system design
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Temperature-Invariant High-Resolution Imaging for Automotive Cameras Using Collaborative Passive Compensation

Shenwei Xu, Haoyun Wei, Zhaoqing Liu, Kouwen Zhang et al.
1 links
Sensors
Advanced optical system design
article

Temperature-Invariant High-Resolution Imaging for Automotive Cameras Using Collaborative Passive Compensation

Shenwei Xu, Haoyun Wei, Zhaoqing Liu, Kouwen Zhang, Xiaoyang Lin, Junyu Zhou, Yan Li
article en

Abstract

Thermal-induced degradation of modulation transfer function (MTF) and image sharpness in automotive camera modules under large real-world temperature variations is a key bottleneck for the safe deployment of level 3 and higher advanced driver assistance systems. To address this challenge, a collaborative passive compensation framework is proposed to maintain high-resolution imaging performance across extreme temperature conditions. Within this framework, an elastic spacer is embedded into the lens stack as an additional optical design degree of freedom. This carefully engineered element expands the thermal focus compensation capability of the lens assembly and suppresses inherent back focal plane (BFP) drift within a narrow range through coordinated opto-mechanical coupling optimal design. Then, a metal stiffener plate is introduced to tailor the thermo-mechanical deformation behavior of the detector-mounted printed circuit board. By optimizing the thickness of the stiffener plate, the residual thermally induced BFP drift of the overall opto-mechanical system is effectively counteracted, enabling global opto-mechanical–thermal equilibrium. Experimental results from the prototype camera module demonstrate that, over an ultra-wide temperature range from −40 °C to +95 °C, the maximum absolute BFP mismatch between the lens optical focus plane and the image sensor plane is constrained within 1m, achieving ∼90% reduction compared with conventional optical-only athermalization approaches. At a spatial frequency of 119 lp/mm, the MTF at the center and the left/right 0.7-field positions consistently exceeds the design threshold of 0.5 with negligible degradation throughout the full temperature range. These results demonstrate that the proposed approach enables a fully passive, temperature-invariant automotive camera module, achieving an optimal balance among compactness, cost efficiency, and robustness under harsh automotive operating conditions.

SensorsVol. 26(22)
Tsinghua University (CN)
Advanced optical system design
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon