Ejector-performance-oriented model predictive control of MED-TVC systems under motive steam pressure disturbances
This study addresses the challenge of maintaining high steam utilization efficiency in Multi-Effect Distillation with Thermal Vapor Compression (MED-TVC) systems under motive steam pressure disturbances. Owing to the high sensitivity of conventional fixed-geometry ejector entrainment performance to off-design pressure conditions, conventional temperature regulation strategies can maintain process stability but are generally unable to prevent the ejector from deviating from its optimal high-efficiency operating region. Consequently, system thermal efficiency may deteriorate under pressure disturbances. To address this problem, an ejector-performance-oriented model predictive control (EPO-MPC) strategy is proposed. The strategy combines a dynamic MED model, a data-driven ejector model constructed from computational fluid dynamics (CFD) data and thin-plate-spline (TPS) interpolation, and an ejector-performance-oriented setpoint optimizer embedded in a constrained MPC framework. The optimizer updates the final-effect evaporator temperature setpoint in real time so that the ejector remains close to its high-entrainment double-choked region. Simulations under motive steam pressure variations from 900 to 1300 kPa show that the EPO-MPC achieves a higher entrainment ratio (ER) and gain output ratio (GOR) compared to the PID controller and conventional MPC. The practical efficacy of the EPO-MPC is further validated through physical experiments. Results show that, compared to the PID and conventional MPC, the EPO-MPC achieves a 3.53% and 1.55% increase in GOR under realistic steam pressure fluctuations.
Authors
- Wenxu Sun (ORCID: https://orcid.org/0000-0003-2870-3528)
- Yuanmin Zhang (ORCID: https://orcid.org/0000-0003-3024-9555)
- Hui Gao (ORCID: https://orcid.org/0000-0002-9591-3907)
- Lei Jia
- Zhizheng Zhang
- Hailun Zhang
- 黄晓蕾
Institutions
- Shandong University (CN)
Publication Details
- Journal
- Case Studies in Thermal Engineering
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1016/j.csite.2026.108724
- Primary Topic
- Advanced Control Systems Optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- Taishan Industry Leading Talents