Fabrication and Contact Angle Prediction of Micro-Grooved Polymer Surfaces Using Micro-Injection Molding

To optimize the hydrophobicity of polymer surfaces, micro-V-grooved polymer surfaces were fabricated in the study by replicating the micro-V-grooved array structures of a micro-ground titanium silicon carbide (Ti3SiC2) mold core through micro-injection molding. The effects of the micro-injection molding parameters, namely melt temperature, injection speed, holding pressure and holding time, on the replication rate and surface hydrophobicity were investigated, and the wetting behavior of the micro-V-grooved polymer surfaces was analyzed. The results showed that the melt temperature had the greatest effect on the surface hydrophobicity of the polymer, whereas the holding pressure had the strongest influence on the replication rate. The measured contact angles of the micro-structured surfaces were numerically closer to the values predicted by the Cassie model than to those predicted by the Wenzel model, which indicates that the Cassie model can serve as a first-order approximation for the contact angle of such surfaces. The largest contact measured on the micro-structured polymer surface was 132.20°, which was 188.58% higher than that of the smooth polymer surface.

Authors

Institutions

Publication Details

Journal
Polymers
Published
2026-11-19
DOI
https://doi.org/10.3390/polym18222907
Primary Topic
Surface Modification and Superhydrophobicity
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Fabrication and Contact Angle Prediction of Micro-Grooved Polymer Surfaces Using Micro-Injection Molding

F N Chen, Yanjun Lu, Chaolan Zhou, Yiqin Hu
2 links
Polymers
Surface Modification and Superhydrophobicity
article

Fabrication and Contact Angle Prediction of Micro-Grooved Polymer Surfaces Using Micro-Injection Molding

F N Chen, Yanjun Lu, Chaolan Zhou, Yiqin Hu
article en

Abstract

To optimize the hydrophobicity of polymer surfaces, micro-V-grooved polymer surfaces were fabricated in the study by replicating the micro-V-grooved array structures of a micro-ground titanium silicon carbide (Ti3SiC2) mold core through micro-injection molding. The effects of the micro-injection molding parameters, namely melt temperature, injection speed, holding pressure and holding time, on the replication rate and surface hydrophobicity were investigated, and the wetting behavior of the micro-V-grooved polymer surfaces was analyzed. The results showed that the melt temperature had the greatest effect on the surface hydrophobicity of the polymer, whereas the holding pressure had the strongest influence on the replication rate. The measured contact angles of the micro-structured surfaces were numerically closer to the values predicted by the Cassie model than to those predicted by the Wenzel model, which indicates that the Cassie model can serve as a first-order approximation for the contact angle of such surfaces. The largest contact measured on the micro-structured polymer surface was 132.20°, which was 188.58% higher than that of the smooth polymer surface.

PolymersVol. 18(22)
Shenzhen University (CN), Shenzhen Technology University (CN)
Surface Modification and Superhydrophobicity
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon