Leaching Requirement for Cotton Under Film-Mulched Drip Irrigation with Brackish Water

Film-mulched drip irrigation (FMDI) is used increasingly for cotton (Gossypium hirsutum L.) production in arid regions. However, salts often accumulate in the soil, eventually leading to soil salinization and crop failure when using FMDI with brackish water inappropriately. Evaluation of the leaching requirement (LR) for cotton under FMDI with brackish water that comprehensively considers cotton yield, water saving, soil conditions, and economic benefits needs to be investigated more completely. The present study compared the cotton growth for different leaching fractions (LF) under FMDI with brackish water and provides comprehensive analysis of LR for cotton and its relationships with soil conditions. A higher LF was related to a lower cotton yield when the LF was larger than 0.15. Moreover, a larger LF led to a lower ratio of reproductive growth and irrigation water productivity when the LF was larger than 0.2. A high soil water content (SWC) strip was observed in the 40–60 cm soil layers for all scenarios. Moreover, a higher SWC proportion in the deeper soil layers as for LF0.15 or LF0.2 may also be beneficial to cotton growth. Soil salinity decreased with decreases in irrigation water quantity when the LF was lower than 0.2, but increased when the LF was higher than 0.2. Either too much or too little irrigation water was not beneficial from an economic perspective. Our study indicated that the LR values between 0.05 and 0.15 were recommended for FMDI when the total dissolved solids for brackish water is within 1.61–3.21 g L−1. Integrated strategies, including optimized irrigation-fertilizer management, groundwater depth monitoring, and halophyte intercropping, are required to sustain production while mitigating secondary salinization and groundwater pollution under FMDI with brackish water.