Rationally designed supported Keggin-type heteropolyacids steering monoaromatic hydrocarbons-rich oil production from catalytic conversion of end-of-life tires

Waste tire pyrolysis offers an attractive route for converting an abundant waste into valuable chemicals; however, the resulting pyrolytic oil is a complex mixture with limited direct applications. Enriching this oil in monoaromatic hydrocarbons (MAHs) can increase its value and facilitate downstream processing. Here, TPA/TiO 2 catalysts were optimized using a central composite design to determine how TPA loading (5.7–69 wt%) and calcination temperature (138–562 °C) affect catalyst acidity and MAH formation. Response surface modeling identified an optimum at approximately 37 wt% TPA and 350 °C. The catalyst prepared under these conditions exhibited a favorable amount and strength distribution of accessible acid sites and reached a relative MAH abundance of 45.2% in the analytical micropyrolysis experiments. Excessive TPA loading reduced the surface area and pore volume, consistent with partial pore blockage, whereas higher calcination temperatures caused structural changes in the supported heteropolyacid phase and a marked loss of acidity. Product distributions showed that lower acidity favored p-cymene accumulation, while an appropriate contribution of medium and strong acid sites promoted further conversion toward MAHs. Excessive acidity, in turn, increased the formation of indenes and naphthalene-type compounds. When evaluated in a laboratory-scale fixed-bed reactor, relative MAH abundance depended strongly on reaction temperature, increasing from approximately 24% at 400 °C to approximately 64% at 500 °C. These results connect catalyst preparation, acidity, and aromatic selectivity and provide a rational basis for designing supported heteropolyacid catalysts for waste-tire valorization.

Authors

Institutions

Publication Details

Journal
Fuel Processing Technology
Published
2026-11-17
DOI
https://doi.org/10.1016/j.fuproc.2026.108643
Primary Topic
Thermochemical Biomass Conversion Processes
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Rationally designed supported Keggin-type heteropolyacids steering monoaromatic hydrocarbons-rich oil production from catalytic conversion of end-of-life tires

Marco A. Ocsachoque, Ileana D. Lick, Luis René Pizzio, María Consuelo Alvarez-Galván et al.
Fuel Processing Technology
Thermochemical Biomass Conversion Processes
article

Rationally designed supported Keggin-type heteropolyacids steering monoaromatic hydrocarbons-rich oil production from catalytic conversion of end-of-life tires

Marco A. Ocsachoque, Ileana D. Lick, Luis René Pizzio, María Consuelo Alvarez-Galván, Paula Osorio Vargas, Mónica L. Casella, Luis Ernesto Arteaga-Pérez, Daniela Correa-Muriel, Maricarmen Capel
article en

Abstract

Waste tire pyrolysis offers an attractive route for converting an abundant waste into valuable chemicals; however, the resulting pyrolytic oil is a complex mixture with limited direct applications. Enriching this oil in monoaromatic hydrocarbons (MAHs) can increase its value and facilitate downstream processing. Here, TPA/TiO 2 catalysts were optimized using a central composite design to determine how TPA loading (5.7–69 wt%) and calcination temperature (138–562 °C) affect catalyst acidity and MAH formation. Response surface modeling identified an optimum at approximately 37 wt% TPA and 350 °C. The catalyst prepared under these conditions exhibited a favorable amount and strength distribution of accessible acid sites and reached a relative MAH abundance of 45.2% in the analytical micropyrolysis experiments. Excessive TPA loading reduced the surface area and pore volume, consistent with partial pore blockage, whereas higher calcination temperatures caused structural changes in the supported heteropolyacid phase and a marked loss of acidity. Product distributions showed that lower acidity favored p-cymene accumulation, while an appropriate contribution of medium and strong acid sites promoted further conversion toward MAHs. Excessive acidity, in turn, increased the formation of indenes and naphthalene-type compounds. When evaluated in a laboratory-scale fixed-bed reactor, relative MAH abundance depended strongly on reaction temperature, increasing from approximately 24% at 400 °C to approximately 64% at 500 °C. These results connect catalyst preparation, acidity, and aromatic selectivity and provide a rational basis for designing supported heteropolyacid catalysts for waste-tire valorization.

Fuel Processing TechnologyVol. 294
Universidad de Talca (CL), Consejo Superior de Investigaciones Científicas (ES), Consejo Nacional de Investigaciones Científicas y Técnicas (AR), University of Concepción (CL), Instituto de Catálisis y Petroleoquímica (ES), Universidad Nacional de La Plata (AR)
Agencia Nacional de Investigación y Desarrollo, Fondo Nacional de Desarrollo Científico y Tecnológico
Responsible consumption and production
Thermochemical Biomass Conversion Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon