An integrated monolithic photonic accelerometer with on-chip fringe-counting

Photonic integrated circuits have transformed optical communication and information processing, yet their potential for precision inertial sensing remains largely untapped. To date, photonic accelerometers have been constrained by readout complexity, limited dynamic range, and insufficient experimental validation. Here we present the design, modelling, and experimental characterization of an integrated photonic accelerometer that combines high sensitivity with substantially enhanced dynamic range via phase-unwrapping. The device achieves a measured noise floor of $$2.0{\rm{\mu }}g/\sqrt{{Hz}}$$ , with a pathway towards $$\sim 10{ng}/\sqrt{{Hz}}$$ through simultaneous scaling of the input optical power and the number of waveguide loops on the cantilever — together projected to bring the input-referred shot-noise-limited sensitivity to the thermal-mechanical noise floor. By incorporating ellipse-fitting-based phase-unwrapping, the sensor enables accurate phase recovery over a substantially expanded measurement range, yielding a 39 dB improvement in dynamic range compared to a conventional Mach–Zehnder interferometer. To our knowledge, this is the first photonic integrated circuit accelerometer to incorporate fringe-counting functionality in a monolithic chip, and the first systematic study of such a strategy in integrated photonic inertial sensors. The photonic hardware enabling open-loop fringe counting — two Mach–Zehnder interferometers with a nominal quarter-wavelength inter-arm path-length offset, whose actual inter-interferometer phase difference is recovered from an in-situ ellipse fit — is monolithically integrated on the silicon-nitride chip, while the ellipse-fit phase-unwrapping algorithm runs in post-processing without active biasing or feedback control. These results establish integrated photonics as a promising platform for high-dynamic-range inertial sensing and a route to chip-scale accelerometers that could surpass existing chip-based technologies.

Authors

Institutions

Publication Details

Journal
Microsystems & Nanoengineering
Published
2026-07-24
DOI
https://doi.org/10.1038/s41378-026-01410-1
Primary Topic
Advanced Fiber Optic Sensors
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

An integrated monolithic photonic accelerometer with on-chip fringe-counting

ZG Liu, Neal A. Hall, Ehsan Vatankhah, Wei Wang et al.
Microsystems & Nanoengineering
Advanced Fiber Optic Sensors
article

An integrated monolithic photonic accelerometer with on-chip fringe-counting

ZG Liu, Neal A. Hall, Ehsan Vatankhah, Wei Wang, Yuqi Meng, Qiyun Hu
article en

Abstract

Photonic integrated circuits have transformed optical communication and information processing, yet their potential for precision inertial sensing remains largely untapped. To date, photonic accelerometers have been constrained by readout complexity, limited dynamic range, and insufficient experimental validation. Here we present the design, modelling, and experimental characterization of an integrated photonic accelerometer that combines high sensitivity with substantially enhanced dynamic range via phase-unwrapping. The device achieves a measured noise floor of $$2.0{\rm{\mu }}g/\sqrt{{Hz}}$$ , with a pathway towards $$\sim 10{ng}/\sqrt{{Hz}}$$ through simultaneous scaling of the input optical power and the number of waveguide loops on the cantilever — together projected to bring the input-referred shot-noise-limited sensitivity to the thermal-mechanical noise floor. By incorporating ellipse-fitting-based phase-unwrapping, the sensor enables accurate phase recovery over a substantially expanded measurement range, yielding a 39 dB improvement in dynamic range compared to a conventional Mach–Zehnder interferometer. To our knowledge, this is the first photonic integrated circuit accelerometer to incorporate fringe-counting functionality in a monolithic chip, and the first systematic study of such a strategy in integrated photonic inertial sensors. The photonic hardware enabling open-loop fringe counting — two Mach–Zehnder interferometers with a nominal quarter-wavelength inter-arm path-length offset, whose actual inter-interferometer phase difference is recovered from an in-situ ellipse fit — is monolithically integrated on the silicon-nitride chip, while the ellipse-fit phase-unwrapping algorithm runs in post-processing without active biasing or feedback control. These results establish integrated photonics as a promising platform for high-dynamic-range inertial sensing and a route to chip-scale accelerometers that could surpass existing chip-based technologies.

Microsystems & NanoengineeringVol. 12(1)
The University of Texas at Austin (US)
U.S. Department of Energy, National Aeronautics and Space Administration
Affordable and clean energy
Openalex Percentile: Top 16%
Advanced Fiber Optic Sensors
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.