Flexible Thermoelectric Fibers Based on Shear-Aligned MWCNT/PEDOT:PSS Networks for Versatile Applications
Flexible thermoelectric fibers for wearable applications require balanced electrical performance, mechanical deformability, and continuous processability. Here, MWCNT/PEDOT:PSS composite fibers were fabricated by wet spinning followed by H2SO4 post-treatment. High-shear fibers exhibited an oriented surface texture and scattering anisotropy, while acid treatment reduced PSS-related spectral contributions. Compared with the low-shear samples, high-shear processing increased electrical conductivity and power factor (PF) by 41.5% and 47.6%, respectively. A loading of 20 wt % MWCNTs was selected by considering thermoelectric performance, spinning continuity, and tensile deformability, yielding fibers with a tensile strength of approximately 250 MPa and a fracture strain of approximately 12%. Electrical conductivity reached 1364.2 S·cm–1 after 3 h of acid treatment, whereas the 2 h treatment produced a Seebeck coefficient of 14.1 μV·K–1 and a PF of 21.2 μW·m–1·K–2. Measurements over 1000 bending cycles and 30 days of exposure to air showed modest conductivity changes and relatively stable Seebeck coefficients. The devices demonstrated temperature sensing, respiratory monitoring, and joint-motion monitoring, with a thermal response time of approximately 1.2 s and wrist-mounted open-circuit voltages of approximately 0.33–0.34 mV. A time-division multiplexing (TDM) strategy using alternating zero-current and constant-current measurements provided separate thermoelectric-voltage and resistance-response channels. These results demonstrate a route to flexible thermoelectric fibers that integrate continuous processability, mechanical deformability, and multimodal wearable sensing.
Authors
- Xie HC
- Haoyu Mo (ORCID: https://orcid.org/0000-0002-4352-8273)
- Jingjing Zhang
- Ruiyi Tian
- Xu Qin
- Lifei Chen (ORCID: https://orcid.org/0000-0001-8316-6759)
- Xueling Zhao (ORCID: https://orcid.org/0009-0000-7652-6859)
Institutions
- Shanghai Polytechnic University (CN)
Publication Details
- Journal
- ACS Applied Polymer Materials
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1021/acsapm.6c03530
- Primary Topic
- Advanced Thermoelectric Materials and Devices
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Shanghai Education Development Foundation
- Shanghai Municipal Education Commission
- Science and Technology Commission of Shanghai Municipality
- Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learning