Profilometric Measurement of Wear Scar Volume After Abrasive Resistance Test

Abrasive wear is responsible for a substantial part of wear-related failures. Dry sand/rubber wheel tests are typically applied to analyze the abrasive wear resistances of materials. Volumetric wear, preferable to mass loss, is typically determined indirectly using the gravimetric method. It is not possible to obtain information on the amount of wear in various places of wear scar with this technique. There are other deficiencies in the gravimetric method of wear measurement. The profilometric technique based on the measurement of the areal (3D) topography of a surface allows us to directly measure the volume of a wear scar, including information on wear amount at several places of a wear track. The procedure to determine the wear volume on the basis of the measurement of the 3D surface texture is described. To shorten the time for 3D surface topography measurement, volumetric loss can be precisely evaluated based on the measurement of several profiles along the sliding direction. The proposed number of profiles was six—the relative errors were less than 5%.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-13
DOI
https://doi.org/10.3390/ma19224817
Primary Topic
Surface Roughness and Optical Measurements
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Profilometric Measurement of Wear Scar Volume After Abrasive Resistance Test

Sławomir Woś, Wiesław Żelasko, Paweł Pawlus, Rafał Reizer
1 links
Materials
Surface Roughness and Optical Measurements
article

Profilometric Measurement of Wear Scar Volume After Abrasive Resistance Test

Sławomir Woś, Wiesław Żelasko, Paweł Pawlus, Rafał Reizer
article en

Abstract

Abrasive wear is responsible for a substantial part of wear-related failures. Dry sand/rubber wheel tests are typically applied to analyze the abrasive wear resistances of materials. Volumetric wear, preferable to mass loss, is typically determined indirectly using the gravimetric method. It is not possible to obtain information on the amount of wear in various places of wear scar with this technique. There are other deficiencies in the gravimetric method of wear measurement. The profilometric technique based on the measurement of the areal (3D) topography of a surface allows us to directly measure the volume of a wear scar, including information on wear amount at several places of a wear track. The procedure to determine the wear volume on the basis of the measurement of the 3D surface texture is described. To shorten the time for 3D surface topography measurement, volumetric loss can be precisely evaluated based on the measurement of several profiles along the sliding direction. The proposed number of profiles was six—the relative errors were less than 5%.

MaterialsVol. 19(22)
Rzeszów University of Technology (PL), University of Rzeszów (PL)
Surface Roughness and Optical Measurements
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon