Experimental Investigation of Mechanical Performance and Gamma Radiation Shielding of Hybrid Magnetite–Dolomite High-Density Concrete

Nuclear infrastructure requires reliable gamma radiation shielding, for which heavyweight concrete offers a practical, structural solution. Conventional concrete provides poor gamma shielding and heat durability, demanding a denser alternative. Prior studies show that magnetite enhances attenuation and strength, while dolomite improves thermal/mechanical stability, yet findings are dispersed across materials and test conditions. Hybrid magnetite–dolomite concrete requires systematic evaluation for simultaneous optimal gamma shielding and mechanical performance under nuclear conditions. Two mixes were produced by partial replacement of coarse aggregate (Mix 1: 50% magnetite, 25% dolomite; Mix 2: 25% magnetite, 50% dolomite), casted and cured per standard practice with compressive strength measured at 7 and 28 days. Gamma attenuation was quantified using Cs-137 and Co-60. Mix 1 achieved 78.78% attenuation for Cs-137 and 76.86% for Co-60, while Mix 2 reached 77.65% and 74.68%, respectively. At 28 days, peak compressive strengths were 25.8 MPa (magnetite), 22.6 MPa (dolomite), and 20.6 MPa (control), with pre-peak energy capacity ranking as follows: magnetite > dolomite > control. Magnetite increased strength and attenuation but sharpened post-peak softening, whereas dolomite enhanced deformability and energy dissipation with minimal loss in shielding. Hybrid concrete satisfied shielding and strength targets and outperformed conventional concrete, with a magnetite-forward blend offering the best overall protection.