Comparing the Properties of Cellulose Nitrates Synthesized from Miscanthus × giganteus Stems and from Commercial Microcrystalline Cellulose

This paper reports new results on the synthesis and comparative characterization of cellulose nitrates (CNs) derived from Miscanthus × giganteus stems and from commercial microcrystalline cellulose (MCC). Miscanthus CNs synthesized by nitration with mixed sulfuric–nitric acids containing 16–20% water exhibit new functional properties: a high solubility in organic solvents (100% in acetone and 97–99% in alcohol–ether solvent) and a high viscosity (17–51 mPa·s), with a nitrogen content of 10.54–12.08 wt%. CNs from Miscanthus × giganteus are similar in nitrogen content and solubility to those from MCC (11.54% and 99%) but have a significantly greater viscosity (3 mPa·s), which is an undoubted advantage and considerably expands their potential application range. The solubility test of CNs synthesized from both sources demonstrated that Miscanthus CNs have a better film-forming ability. SEM analysis revealed a great difference in fiber length, despite the same cylindrical shape and observed aggregation: 1.0–2.0 mm for CNs from Miscanthus versus 40–60 μm for CNs from MCC. IR spectra of CNs from both sources showed the appearance of five new characteristic frequencies (1632–1633, 1273–1274, 823–826, 748, 677–686 cm–1 for Miscanthus CNs and 1659, 1277, 832, 747, 691 cm–1 for CNs from MCC), allowing the obtained compounds to be identified as nitric acid esters of cellulose. According to TGA/DTA analysis, the synthesized polymers have similarly high values of the onset temperature of both intense decomposition (197–198 °C) and narrow exothermic peaks (209–211 °C and 212 °C), respectively, indicating their high thermal stability. The combination of high solubility, viscosity, thermal stability and chemical purity of CNs derived from Miscanthus × giganteus stems suggests that strong thin films can be obtained and recommended for use in the manufacture of nitrocellulose membranes.