Characteristics of Pore Oil–Water Occurrence in Shale Oil Reservoirs Using NMR Technique

High Resolution Image Download MS PowerPoint Slide Efficient exploration and development of shale oil heavily rely on the precise evaluation of multiphase pore fluids within reservoirs. Currently, two-dimensional (2D) nuclear magnetic resonance (NMR) T 1 -T 2 spectra effectively characterize multiphase pore fluids, but prolonged acquisition times restrict their routine application. Conversely, one-dimensional (1D) NMR T 2 measurements offer rapid acquisition but suffer from severe signal overlap. To address this limitation, a T 2 spectral fluid identification method based on a skewed Gaussian mixture model is introduced in this study. NMR T 2 and T 1 -T 2 experiments were conducted on shale samples from the Qingshankou Formation in the Sanzhao Sag under five specific states: as received (AR), water restoration (WR), water and oil restoration (WOR), solvent extracted and dried (Dry), and oil saturated (SO). By extracting T 2 projection spectra from the 2D T 1 -T 2 spectra, conversion coefficients between the projections and 1D T 2 spectra were established to decouple the overlapping fluid signals. The results indicate that, in the SO state, the ratio of adsorbed oil to bound oil in the 1D T 2 spectrum is 2.4999 times that in the T 2 projection spectrum, with a conversion coefficient of 0.1179 determined for the (pseudo)-solid component. By applying these conversion factors, the pore fluid signals within the T 2 spectra at the WOR state were successfully identified. Under the WOR conditions, capillary-bound water exhibits the highest conversion coefficient (0.5171). Notably, the presence of pore water significantly lowers the conversion factors for adsorbed and bound oil (0.3663 and 0.1491, respectively) compared to the SO state, whereas movable oil demonstrates no significant correlation. Furthermore, the pore size distributions associated with each fluid type were delineated. These findings facilitate more accurate identification of multiphase pore fluids from 1D T 2 spectra, providing novel insights into NMR-based fluid evaluation in shale oil reservoirs.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-06-30
DOI
https://doi.org/10.1021/acsomega.6c04644
Primary Topic
NMR spectroscopy and applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Characteristics of Pore Oil–Water Occurrence in Shale Oil Reservoirs Using NMR Technique

X Wang, Weizheng Gao, Bo Gao, Shuangfang Lu et al.
ACS Omega
NMR spectroscopy and applications
article

Characteristics of Pore Oil–Water Occurrence in Shale Oil Reservoirs Using NMR Technique

X Wang, Weizheng Gao, Bo Gao, Shuangfang Lu, Yanshuang Jia, Pengfei Zhang, Yu Qiao, Guolong Chen, C Wu, Ruijing Lu
article en

Abstract

High Resolution Image Download MS PowerPoint Slide Efficient exploration and development of shale oil heavily rely on the precise evaluation of multiphase pore fluids within reservoirs. Currently, two-dimensional (2D) nuclear magnetic resonance (NMR) T 1 -T 2 spectra effectively characterize multiphase pore fluids, but prolonged acquisition times restrict their routine application. Conversely, one-dimensional (1D) NMR T 2 measurements offer rapid acquisition but suffer from severe signal overlap. To address this limitation, a T 2 spectral fluid identification method based on a skewed Gaussian mixture model is introduced in this study. NMR T 2 and T 1 -T 2 experiments were conducted on shale samples from the Qingshankou Formation in the Sanzhao Sag under five specific states: as received (AR), water restoration (WR), water and oil restoration (WOR), solvent extracted and dried (Dry), and oil saturated (SO). By extracting T 2 projection spectra from the 2D T 1 -T 2 spectra, conversion coefficients between the projections and 1D T 2 spectra were established to decouple the overlapping fluid signals. The results indicate that, in the SO state, the ratio of adsorbed oil to bound oil in the 1D T 2 spectrum is 2.4999 times that in the T 2 projection spectrum, with a conversion coefficient of 0.1179 determined for the (pseudo)-solid component. By applying these conversion factors, the pore fluid signals within the T 2 spectra at the WOR state were successfully identified. Under the WOR conditions, capillary-bound water exhibits the highest conversion coefficient (0.5171). Notably, the presence of pore water significantly lowers the conversion factors for adsorbed and bound oil (0.3663 and 0.1491, respectively) compared to the SO state, whereas movable oil demonstrates no significant correlation. Furthermore, the pore size distributions associated with each fluid type were delineated. These findings facilitate more accurate identification of multiphase pore fluids from 1D T 2 spectra, providing novel insights into NMR-based fluid evaluation in shale oil reservoirs.

ACS Omega
Oil and Gas Research Institute (RU), Research Institute of Petroleum Exploration and Development (CN), Northeast Petroleum University (CN)
Key Research and Development Program of Heilongjiang, Education Department of Hainan Province, National Science and Technology Major Project, Sanya Yazhou Bay Science and Technology City
Clean water and sanitation
Openalex Percentile: Top 10%
NMR spectroscopy and applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.